Installed Height | 1200mm [Above Ground Incl. Clearance] |
Total Post Length | [Bolt down: 1200mm] [Dig In: 1700mm] |
Panel Width | 2900mm |
Total Width | 2950mm from post centre to post centre |
Weight | [Bolt down: 29.7kg] [Dig In: 29.9kg] |
Box Section of Posts | 50mm x 50mm |
Base Plate Size | 150mm x 150mm |
Thickness of Railing Bars | 20mm |
Distance Between Railing Bars | 100mm from bar centre to bar centre |
Rail Style | Bow Top Play Sec - Hollow Tubular |
Post Type | Dig In, Bolt Down |
Material | Pre-Galvanised Steel |
Finish | Polyester Powder Coated (PPC) |
PPC Colours | Green, Black, Blue, Red, Grey, Yellow |
Name | Quantity |
---|---|
EnviroRail® Play Sec Railing Panels | 1 |
Railing Posts | 1 |
Twist Cleats | 4 |
M10 x 70mm Bolts | 2 |
M10 Shear Nuts | 2 |
Support Legs | 1 |
Ribbed Post Insert | 1 |
This range of child friendly playground railings has been designed to be a greener alternative to standard metal bow top fencing systems.
Our EnviroRail® range of bow top railings has been specifically designed to create a strong and stable perimeter whilst also reducing the amount of resource and energy consuming welding required. Each bay of 1.2m bow top play sec railing utilizes custom designed and formed components which, when pressed together, form an incredibly tight bond. The end result is a high quality, strong and hard-wearing railing system which is more environmentally friendly than its traditional bow top railing counterparts.
These play sec railings aren’t just a more environmentally friendly railing solution, it has also been designed with safety in mind. The bow top design removes any sharp points from the top of each bay. All of the gaps within the bay are no larger than 89mm in width, this helps to prevent accidents from occurring in which limbs have become trapped. For additional peace of mind, these bow top railings have been designed to meet the BS EN 1176 regulations which are required for playground equipment.
Each EnviroRail® kit is comprised of pre-galvanised steel hollow tubular sections. These hollow tubes provide an incredibly high level of strength whilst helping to keep the weight to a minimum, making handling, transport and installation much easier.
So that these railing systems can be installed in as many different locations and on many different ground types, they are available with either dig in or bolt down posts.
Please note: post mix and ground anchor bolts are not included with these kits and will need to be purchased separately.
Each bay of 1.2m high EnviroRail® bow top play sec railings have been made using excellent quality pre-galvanised steel and finished with a professionally applied Polyester Powder Coating (PPC). These coatings are available in a range of bright and colourful options, to create a fun and safe perimeter system. The PPC finishes also provide an additional purpose of providing the steel with an additional layer of protection against the damaging effects of weathering and corrosion, allowing these metal playground railings to look great and remain strong for years to come.
Step One: Drill a 6mm pilot hole in the desired location for the new cleat; this is dictated by the gradient.
Step Two: Open the hole to a 12mm hole size to take the M10 bolts (as listed in the step below).
Step Three: Touch up and spray the hole, if required.
Step Four: Attach the cleat using the M10 x 70mm Square Cup Head Bolt and Shear Nut (for 0.9m to 1.2m height system) or M10 x 80mm Square Cup Head Bolt and Shear Nut (1.5m to 2.4m height systems).
Step Five: Attach the railing panel as per standard installation guidance.
Note: Please ensure the spacing relationships are followed according to the existing hole centres on the posts.
Should you have any questions about the 1.2m High EnviroRail® Bow Top Play Sec Railing kits, or any of our other railing and fencing systems, please don’t hesitate to get in touch. We can be reached via email at sales@firstfence.co.uk , by phone on 01283 512 111 or through our online phone system.