How to Mount the Locinox Panther Gate Closer onto Posts & Walls
Step-by-Step Installation & Product Overview 🛠️
Discover how to fit, configure, and adjust the Locinox Panther hydraulic gate closer for both wall and post mounting setups. Available to order online today from First Fence, this compact hydraulic closer provides controlled, smooth self-closing performance for swing gates.
Mark Fixing Points: Measure required clearances and mark hole locations on the wall and gate leaf.
Drill Mounting Holes: Drill fixing holes into the post or wall pillar and gate profile.
Attach Mounting Bracket: Fasten the mounting plate flush against the wall or post using fixing bolts.
Configure Handing: Set the internal mechanism for left-hand or right-hand gate swing.
Mount Closer Body: Slot the Panther hydraulic unit onto the wall bracket and secure.
Fit Slide Rail Arm: Fasten the guide rail assembly onto the gate leaf profile.
Adjust Speed & Snap Force: Use a 3 mm Allen key to fine-tune closing speed and final latching snap.
Attach Outer Shell: Slide and fasten the protective casing for a clean, weather-sealed finish.
🧰Tools Required
Hex / Allen key set (3 mm, 5 mm, 6 mm)
Power drill & bits (14 mm & 15 mm)
Centre punch & hammer
Tape measure & spirit level
🛒 Featured Product
🔒 Locinox Panther Hydraulic Gate Closer
📞 Contact Us
☎️ Call us: 01283 512 111
🌐 Website: https://firstfence.co.uk/
📧 Email: sales@firstfence.co.uk
💼 LinkedIn: /firstfenceltd
💬Facebook: /firstfenceltd
