Height | 1200mm [above ground] |
Access Width | 4000mm |
Box Sections of Posts | [Hinge Post: 150mm x 150mm] [Catch Post: 100mm x 100mm] |
Gate Hanging Side | Right Hand Hung [From Outside Looking In] |
Thickness of Wires | [Horizontal: 8mm] [Vertical: 6mm] |
Material | Pre-Galvanised Steel |
PPC Colours | vailable in Green, Black, Blue, Red, Grey, & Brown - Other custom RAL colours are available |
Name | Quantity |
---|---|
Sliding Gate Leaf | 1 |
Catch Gate Post | 1 |
Hinge Gate Post | 1 |
Drop Bolts | 1 |
Adjustable Gate Eyes | 2 |
Ribbed Inserts [For Gate Posts] | 2 |
Ribbed Inserts [For Gate Frame] | 2 |
Twin or 868 mesh is a welded system that consists of 6mm vertical wires that cross over 8mm horizontal wires and has a very recognisable appearance. The close spacing of the wires means that it difficult to hold onto with fingers or feet and therefore is a deterrent to anyone considering trying to scale your fencing system, particularly with the higher gates.
There is good visibility through the panel and they are often used in low to medium security settings. They can be seen used around playgrounds and schools and some industrial settings.
The 1.2m x 4.0m Single Leaf 868 Twin Mesh Gate can be installed into an 868 twin mesh fencing system where access is required for cars and forklifts. The gate is suitable for a fencing system of the same height and will keep your location protected from potential intrusion. The gate consists of a single leaf and should be secured shut by lowering the drop bolt into the ground and shifting the sliding latch bolt across. A heavy duty padlock can be added for additional security.
With its great rigidity and toughness, the gate is tamper proof and will safeguard well any area or building it surrounds. With its colourful look the 868 twin mesh gate is a very popular choice for public areas and can be matched to corporate branding to enhance the look of your perimeter.
At First Fence we offer a large variety of different RAL colours in polyester powder coating, giving the gate a more attractive and visible appearance. Powder coating the gates also helps boost their lifespan as it prevents the gates from rusting due to weather and general wear.
With the exception of ground anchor bolts and post mix, this kit contains the following:
Please Note: When attaching your gate to our mesh fencing, additional M8 x 40mm bolts and mesh fencing clips will be required.
Our friendly and helpful sales team are here to offer advice and support for all of our fencing and accessories. You can reach us by phone on 01283 512 111, by email at sales@firstfence.co.uk or you can also speak to us through our online chat system.