Injection Resin Vinyl Ester 410ml Cartridge With Mixer Nozzle

Injection Resin Vinyl Ester 410ml Cartridge With Mixer Nozzle

Bolt down fixings are an excellent way of securing your gate posts to hard ground, however with time they can become loose, the substance they are attached to may crack, and an unsafe gate is a hazard. A chemical fixing may be a better choice for this situation.

Resin or chemical fixings help to form a very stable, watertight joining and will bond to the shape of the drilled hole. The stress load of the gate is conveyed along the full length of the bond created by the resin and the bolt and because of this strength it is possible to have much closer edge and spacing gaps. This isn’t always possible with a mechanical fixing in weaker masonry as it may crack or crumble.

This 410ml vinyl ester resin comes with a nozzle (spares can be purchased on the First Fence website). The narrow end already has a hole for accurate resin transfer and the nozzle can be cut with a blade if you wish to shorten the length. This cartridge will be sufficient for between 5 and 10 ground anchor bolts depending on size of hole. Fill three quarters of the hole with resin before inserting and twisting the anchor into it.

This product is styrene free which means it is safe for both transport and health. It can be used for threaded stud installation, internal threaded sockets, and rebar. Correct preparation for fitting chemical resin anchors is essential, First Fence have all the accessories you need to get the job done including a heavy duty applicator gun, stud ground anchor bolts, cleaning brush and blow out pump.

If you have any questions please get in touch with our friendly team by calling 01283 512111 or by using the online chat facility where someone will be happy to help you.