2.1m high Double Leaf Standard Bow Top Railing Gate

£513.00 £615.60 Inc Vat

Our 2.1m high Double Leaf Standard Bow Top Gate provides a secure access point for vehicles into areas of medium security.

Images shown are for illustration purposes only and actual products may differ slightly


Features and Benefits

  • When installing the gate on softer ground types, Dig-In posts should be used. Bolt-Down posts are suitable for hard ground.
  • Galvanising the steel provides vital protection to the gate from rust and powder coating adds extra resistance to weathering – both of which come as standard.
  • Powder coating is also available in a choice of colours.
  • As these gates do not impair visibility this makes them a good choice for areas such as parks and schools.



These Standard Bow Top Railing Gates turn security fencing into an attractive feature. Compatible with the 2.1m high non-raking Bow Top fences; this gate will enable you to provide a secure access point for vehicles needing to enter your site. Widths ranging from 2.0m to 10.0m wide are available so that you can choose the most suitable access width for your needs, from forklifts to HGVs.  If you are unsure about which types of vehicles can use each gate width, please see our vehicle access chart.

The gate is constructed with an integral sliding latch bolt so that you are able to keep the gate shut when not in use. For added security, it is recommended that you lock the gate using a Heavy Duty Padlock, which are available in the customisation section. The steel gate is galvanised and Polyester Power Coated as standard to provide a superior finish to the gate, as well as giving added protection against rust and damage. Powder coating is available in a range of colours to suit your corporate image.


Construction of the Gate

The railings thread through the horizontal rails twice and are welded in place to produce the attractive bow tops. To allow a 180° sweep on the gate leaves, the hinges are placed at the centre point of the posts. Drop bolts are also located on each leaf so that the leaves are able to be securely held open, either together or individually when in use.



Standing at 2.1m in height, the gate is recommended to be used in areas requiring a low to medium level security, for example commercial business premises and around the perimeters of schools.

More Information
Standard/Self-Raking Standard
Gate Type Double Leaf Gate
Heights Available 2100mm
Post Type Available Dig In, Bolt Down
Access Width 2.0m, 3.0m, 4.0m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m, 10.0m
Finish Galvanised , Powder Coated
PPC Colours Green, Black
Material Galvanised Steel

No Related Posts

We found other products you might like!
Copyright © 2013-2017 Magento, Inc. All rights reserved.