2.0m high Double Leaf Standard Bow Top Railing Gate
*Please note all images are for illustration purposes only and actual products may vary.
Features and benefits
- Provides great visibility through the gate system.
- Hinders climbing attempts.
- Is galvanised with a protective coating of zinc to help prevent the formation of rust.
- Can be customised with a polyester powder coated finish in various standard RAL colours. Powder Coating will give the gate a more aesthetically pleasing appearance. It will also give it extra protection against damage caused by weathering or vandalism.
- Locking the Bow Top Gate with a Heavy Duty Padlock will provide extra security. Padlocks are available from our customisation section.
A manually operated gate, this 2.0m high Standard Bow Top Railing Gate contains two gate leaves which can rotate 180 degrees in total. It is compatible with standard Bow Top Fencing structures of the same height and will provide an access point for vehicle traffic. Installing this Railing Gate will allow you to monitor the accessibility of your site and manage its security. The Railing Gate is manufactured from steel and is also coated in a layer of zinc to help prevent rust – this is known as galvanisation. It is very easy to operate and is designed for permanent installation on both hard and soft ground types. This double leaf Railing Gate is available from First Fence in access widths of 2.0m, 3.0m, 4.0m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m and 10.0m.
This Standard Bow Top Gate is a safer and more attractive type of security gate than say a Palisade Gate, due to its bow top style. Lacking in any sharp points or edges, this Railing Gate is a suitable option for public, domestic and commercial locations.
First Fence manufactures all double leaf Bow Top Gates with a sliding latch bolt, which will secure the gate leaves when closed. They are also supplied with two drop bolts and these will allow the gate leaves to be held open or closed, depending on your requirements.
Dig-In Posts are required when this Railing Gate is installed on soft ground, e.g. grass. (Postmix cement is not supplied with Dig-In Posts and should be ordered separately if needed).
Bolt Down Posts are required when this Railing Gate is installed on hard ground, e.g. concrete.
This double leaf Bow Top Railing Gate is restrictive to climbing attempts, due to its bow top design. This is achieved through the bending of each railing bar. Railing bars pass through the Gates upper bar and are then welded in place to the lower bar. They have been positioned so that they allow for clear visibility through the gate system to the other side, however they still prevent intruders from climbing through to gain unauthorised access.
As this gate is 2.0m high, it is most suitable for areas that have a medium level security risk. You will often see this type of Railing Gate within locations such as parks and commercial establishments.
|In Stock Message [ 0 for In Stock]||0|
|Gate Type||Double Leaf Gate|
|Post Type Available||Dig In, Bolt Down|
|Access Width||2.0m, 3.0m, 4.0m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m, 10.0m|
|Finish||Galvanised , Powder Coated|
|PPC Colours||Green, Black|
Configure 2.0m high Double Leaf Standard Bow Top Railing Gate