How to Install the Locinox Venus-A Motorised Gate Closer
🛠️ Step-by-Step Fitting of the Locinox Venus-A Motorised Gate Closer
Learn how to fit, wire, and configure the Locinox Venus-A motorised gate closer with articulated arm. Engineered specifically for pedestrian swing gates mounted on wide masonry pillars or posts, this step-by-step guide demonstrates complete mechanical fitting and electrical setup.
Mark Drill Points: Position alignment templates on the wall/pillar and gate leaf to mark fixing locations.
Drill Mounting Holes: Drill 15 mm anchor holes into the pillar and fixing holes into the gate profile.
Attach Pillar Bracket: Fasten the heavy-duty mounting plate flush against the masonry pillar.
Mount Drive Unit: Slot the Venus-A motor body onto the wall bracket and secure.
Connect Wiring: Feed power cables through and wire into the integrated controller terminals.
Assemble Articulated Arm: Configure the double-jointed arm for left or right-hand opening.
Attach & Secure Arm: Connect the arm to the motor shaft at a 90° angle and fasten the bracket to the gate leaf.
Fit Casing Covers: Secure the outer protective housing for a sleek, weather-sealed finish.
🧰 Tools Required
Hex / Allen key set
Power drill & 15 mm drill bit
Hammer & centre punch
Spirit level & tape measure
📞 Contact Us
☎️ Call us: 01283 512 111
📧 Email: sales@firstfence.co.uk
💼 LinkedIn: /firstfenceltd
💬 Facebook: /firstfenceltd
