Height | 3000mm (above ground) |
Access Width | 9000mm |
Total Gate Width | 9600mm |
Box Sections of Posts | 150 x 150mm |
Gate Hanging Side | Right Hand Slider Leaf (From Outside Looking In) |
Thickness of Wires | 4mm |
Material | Pre-Galvanised Steel |
PPC Colours | Available in Green, Black, Blue, Red, Grey, & Brown - Other custom RAL colours are also available |
Name | Quantity |
---|---|
Sliding Gate Leaf | 1 |
Catch Gate Leaf | 1 |
Hinge Gate Post | 2 |
Drop Bolts | 2 |
Adjustable Gate Eyes | 4 |
Ribbed Inserts [For Gate Posts] | 1 |
Ribbed Inserts [For Gate Frame] | 4 |
This 3.0m x 9.0m Double Leaf Prison Mesh Gate offers high security and can be used as a vehicle access point for HGV’s and other types of transport. It possess two 4.5m wide gate leaves which are manually operated; either at the same time or separately. The gate is also 3.0m high, making it suitable for places like airports, correctional units and police stations; as these will require a security system which is highly effective in deterring intrusion. It is the Prison Mesh which qualifies this gate as high security, as not only does it prevent climbing and scaling but it can retain its stability and shape even when faced with vandalism. This gate is also designed to be a more sophisticated choice of security gate system. With a polyester powder coated finish, the gate is brighter and by not containing any sharp points or edges, it can offer a higher degree of safety than Palisade gates.
You can prevent the gate leaves from swinging independently by using the sliding latch bolt which will secure them shut. The two drop bolts located on the lower section of each gate leaf can also be lowered into the ground to keep them in place. The gate leaves can fully rotate through to 180 degrees, where they can provide an access space that is 9.0m wide.
Please Note: When attaching your gate to our mesh fencing, additional M8 x 40mm bolts and mesh fencing clips will be required.
358 Prison Mesh is constructed using horizontal and vertical wires, which both have a diameter of 4mm. At 12.7mm high and 76.2mm wide, the apertures within the mesh structure are narrow enough to prevent climbing activity, but at the same time, still provide a great standard of visibility. Prison Mesh is also known as 358 Mesh, which refers to the measurements in imperial units. It is the ultimate choice for high security locations, due to the fantastic strength and rigidity that it offers. Welded at each intersection, the wires are extremely resistant to cutting and vandalism attempts. As with other mesh fencing security solutions, 358 Prison Mesh is an ideal option for a range of areas including police stations and correctional units, commercial establishments, schools and airports.
All our mesh gates are Hot Dip Galvanized, in line with the requirements of BS EN ISO 1461:2009, to offer protection against rust and corrosion. This unique process offers complete coverage and provides maximum protection through a tough and abrasion resistant coating.
Steel being Hot Dip Galvanized progresses through a temperature cycle upon immersion into and withdrawal from the galvanizing bath. Within this dipping process, uneven heating occurs, creating a temperature profile along the part being galvanized. This temperature profile allows the steels internal stresses to be relieved at different times in the immersion cycle. These stresses may cause changes in shape and/or alignment, evident with distortion and warping. Whist we take all reasonable care during the service, we cannot accept liability relating to distortion, buckling, fracture or change in the properties of the goods. Our standard terms and conditions of sale apply at all times.
If you do have any questions please do not hesitate to speak to one of our sales team by calling 01283 512 111 or by using the online chat facility and they will be happy to help you.