1.8m high Single Leaf Standard Vertical Bar Railing Gate
*Please note all images are for illustration purposes only and actual products may vary.
Features and benefits
- The railings offer sufficient visibility so you can clearly see through the gate. The shape and position of the railings also make the gate tough to scale.
- The gate is galvanised, which means that it is supplied with a layer of zinc to work as a protective shield against rust.
- Polyester Powder Coating enables the gate to adopt a more aesthetically pleasing appearance through the addition of colour. This type of finish will also work as a second shield to help protect the gate from the effects of weathering and vandalism.
- A safe and secure gate that is easy to install.
Incorporating this 1.8m high Single Leaf Standard Vertical Bar Railing Gate into your railing structure will enable you to provide a clear point of access for vehicles. You can request this gate in several widths, so you will be able to supply the appropriate level of access to the vehicles visiting your site. This gate is very strong and sturdy and is effective in preventing intrusion. It is designed to be safer than other types of security gates and is considered to have a more decorative look. This gate is suitable for construction within systems which are non-raking and that are 1.8m high.
The gate is manually operated and swings 90 degrees each way. Using the sliding latch bolt will secure the gate leaf in position when it has been closed and lowering the drop bolt into the ground will prevent it from swinging open independently. For extra security, you may use a Heavy Duty Padlock to lock the gate and this is available from the customisation section.
The railing bars are constructed of solid steel and they are cut so that they feature square tops. The railings are inserted through the holes within the top rail and are then welded to the bottom rail of the gate. You will need Bolt Down Posts if you are assembling this gate on a hard ground surface, otherwise you will need Dig-In Posts if you are assembling it on a softer ground type.
The gate’s 1.8m height makes it a suitable option for areas which require a low to medium level of security, for example schools and private driveways.
|In Stock Message [ 0 for In Stock]||Lead times may apply|
|Gate Type||Single Leaf Gate|
|Post Type Available||Dig In, Bolt Down|
|Access Width||2.0m, 3.0m, 4.0m, 5.0m|
|Finish||Galvanised , Powder Coated|
|PPC Colours||Green, Black|
Configure 1.8m high Single Leaf Standard Vertical Bar Railing Gate