1.0m wide Pedestrian Standard Vertical Bar Railing Gate
A 1.0m wide Standard Vertical Bar Pedestrian Gate designed for permanent installation on hard and soft ground.
*Please note all images are for illustration purposes only and actual products may vary.
Features and benefits
- Does not obstruct visibility so activity on the opposite side of the security gate can still be seen.
- Hinders attempts at climbing over and through the Railing Gate to prevent intrusion.
- Steel is galvanised with zinc to help protect it from the development of rust.
- The Vertical Bar Railing Gate can also be powder coated in a selection of standard RAL colours for a brighter and more attractive appearance. Powder coating will also increase the longevity of the gate by protecting it from weathering and vandalism damage. To select this, please go to the customisation section.
- Increase gate security with a Heavy Duty Padlock, available from customisation.
Installing this 1.0m wide Standard Vertical Bar Railing Gate will enable you to permit pedestrian traffic to enter your site when required. It will also help to maintain site security and prevent intrusion. Our manually operated Railing Gate has a single gate leaf which can rotate 180 degrees maximum. This Vertical Bar Gate is only wide enough for the access of pedestrians and should be installed within Standard Vertical Bar Fencing systems. First Fence manufacture Standard Pedestrian Railing Gates at the Midlands Head Office in Swadlincote from high quality steel.
This Pedestrian Railing Gate is also coated with zinc (galvanised) to help prevent the steel from rusting over time. We also manufacture this Gate in heights of 1.0m, 1.2m, 1.5m, 1.8m, 2.0m, 2.1m and 2.4m to cater for all security requirements. It is easy to install and is designed for permanent installation.
The Railing Gate does not contain any spikes or sharp edges and this makes it a safer option for public and domestic areas. It is supplied with a sliding latch bolt which can be shifted across the gate leaf to hold it shut. The Vertical Bar Gate is also supplied with a drop bolt and this can be used to keep the gate leaf open or hold it shut.
1.0m wide Standard Vertical Bar Pedestrian Gates erected on hard ground will require Bolt Down Posts, but they will require Dig-In Posts if erected on soft ground. (Dig-In Posts are not supplied with Postmix Cement for installation – please purchase individually if required).
With solid steel vertical tubular bars, this Pedestrian Railing Gate will effectively restrict climbing attempts over the gate. Railing bars fit through the Railing Gates top rail and are welded to the bottom rail for stability. The railing bars are carefully positioned so they do not obstruct visibility, however they are still too narrow for anyone to climb through to gain access to the site.
As this Standard steel Railing Gate is available in multiple heights ranging from 1.0m up to 2.4m, it can be used to secure locations that need a low to medium level of site security. Pedestrian Railing Gates are often a popular choice for public gardens and residential areas.
|Gate Type||Pedestrian Gate|
|Heights Available||1000mm, 1200mm, 1500mm, 1800mm, 2000mm, 2100mm, 2400mm|
|Post Type Available||Dig In, Bolt Down|
|Finish||Galvanised , Powder Coated|
|PPC Colours||Green, Black|