Height | 1060mm |
Width | 1220mm |
Weight | 1.56kg |
Material | [Post: MDPE] [Panel: UVPVC] |
Compatible with | EVO 80 Barriers |
The reflective plank and post system for the EVO 80 Road Barriers adds an additional 595mm of height to the EVO road barrier system which brings the total height up to 1060mm including the panel.
The reflective plank also provides greater visibility to the water-filled barriers. These are slightly longer than the 80 EVO barrier, with a total length of 1220mm. This is due to how the system is put together.
The plank and post system for the EVO 80 road barrier slots neatly into the hole on the barriers that would ordinarily be used to fill them in. The planks would then connect to the next post via a convenient slot on either side of the post on the next barrier, adding further stability to the barriers as a direct result.
The planks themselves are 139mm high and the reflective strips are Chapter 8 compatible in that the level of visibility complies with the Chapter 8 guidelines. They weigh 1.56kgs each and consist of one white post and one red and white reflective plank. The posts are made from Medium Density Polyethylene (MDPE) and the planks are made from Unplasticized Polyvinyl Chloride (UPVC).
The 1m wide and 555mm high EVO barriers were Mira Tested to provide a guideline for the rest of the EVO barrier, which is one of the UK's leading barrier testing facilities, in a run of three. These were waterfilled to the line and fitted with mini mesh panels. They then withstood winds of up to 55mph and no barrier failed at that speed.
We're here to assist with any questions you have about our plastic barriers or any of the other products we have available. We can be reached by email at sales@firstfence.co.uk, phone on 01283 512 111 or you can speak with one of our friendly team through our online chat service.