Key Clamp Half Height Self Closing Gate 

These high quality self closing half height key clamp gates are an ideal choice for adding access points to a key clamp hand rail perimeter. 
Key clamp, also known as tube clamp is commonly used to create hand railing systems  or perimeters to prevent pedestrians from wandering into unauthorised areas, helping to prevent accident or injury. Available in 48,3mm and 42.4mm tube sizes, these steel gates can be seamlessly installed into a range of hand railing systems. 

Features

• Each key clamp handrail gate has been made from high quality galvanised steel, making them ideal for installation in outdoor areas
• Easy to install - Each gate comes pre-fabricated with hinges pre welded, ready to install within your hand railing perimeter.
• Universally handed - The key clamp half height self closing gate hinges can be adjusted to make them either left or right hand opening.
• Able to be cut to size - This range of self closing gates can be adjusted to fit any gap size by cutting down the horizontal tubes to suit the dimensions of your opening.
• Available in 2 different tube sizes 

Uses 

Our gates are versatile and can be used in various locations to meet different needs. One of their primary functions is to prevent potential trip and fall hazards. With a spring-loaded design and a self-closing hinge, these gates ensure high-quality fall prevention by eliminating the risk of them being left open.

They are also perfect for areas requiring additional protection for personnel and, in some cases, the public. High-risk areas include access ladders, stairways, walkways, warehouses, segregated zones, or as a barrier around machinery.

Specification and installation 

Each key clamp gate has been made using galvanised steel tubes in order to provide a durable and long lasting hand railing system. The corner tube fittings provide a secure connection and help to reduce rust formation by creating a tight seal to prevent water collecting within the joints. 
They can be easily cut down into a shorter width by removing the end tube and fixings, and cutting the two horizontal tubes to the desired length. 
In order to make installation of these gates as simple as possible, they are supplied pre-fabricated with the hinges fully welded. 

When fitting this key clamp gate, the gate will need to be set into its closed position. Turn the hinge bolt half a turn in either the clockwise or anti-clockwise direction depending on the direction of swing required. 

Please note: Over tension of the bolt will damage the spring

Be sure to take a look at the rest of our Tube Clamp range to create strong and robust tube railing systems. 

Contact us

Our friendly and knowledgeable sales team is here to assist with any questions or inquiries you may have, not only about our tube clamp systems but also any of our other fencing products and accessories. You can contact us by phone at 01283 512 111, or reach us online via email at sales@firstfence.co.uk or through our live chat system.