FFL 95 Automated Vertical Bar Cantilever Gate 3.5m - 5.5m Wide
The FFL Series comes with a 2-year manufacturer warranty
Product Description
FFL 95 Automated Vertical Bar Cantilever Gate 3.5m - 5.5m Wide
The FFL 95 Automated Vertical Bar Cantilever Gate is a heavy-duty access solution designed for secure and reliable vehicle entry. Suitable for commercial and residential properties, its cantilever design allows the gate to slide smoothly without a ground track, making it ideal for sites where space is limited.
The FFL 95 features a built-in 24V gate motor, housed within the support post. This provides a clean, streamlined appearance while protecting the automation system from the elements.
The gate features a vertical 25mm round bar infill, offering a sleek, modern appearance while maintaining a high level of security. The bars are welded directly to the gate frame for added strength and durability.
Available in widths from 3.5m to 5.5m, the FFL 95 is offered in a range of heights and standard RAL colours. Custom colours are also available at an additional cost. Galvanised-only options can be discussed with our sales team.
The FFL 95 is also available as the FFL 130 (5.0m - 7.5m wide) and FFL 200 (7.0m - 12.0m wide), as well as a manual version.
All FFL Series manual and automated cantilever gates come with a 2-year manufacturer's warranty.
Features & Benefits
- Heavy-duty steel construction for strength and durability
- Built-in 24V motor housed within the support post
- 100% duty cycle for reliable frequent use
- Opening speed of up to 9m/min
- 25mm round bar vertical infill for a modern appearance and high security
- Bars are welded to the frame for added strength
- Cantilever design eliminates the need for a ground track
- Protective finish helps prevent rust and withstand harsh weather
- Safety sensors stop the gate if an obstruction is detected
- Advanced locking system for enhanced security
- Available in a range of RAL colours
- Plug-and-play system for straightforward installation
- Compatible with access control and smart technology
Optional Extras
Enhance your gate with a range of optional accessories, including:
- Anti-climb spikes (available on gates over 1.8m high)
- Reflective strips
- Loop detectors
- Intercoms
- Press-to-exit buttons
- Laser scanners
Run-Back Space Requirements
The FFL 95 requires sufficient space behind the gate to allow it to fully open. Make sure your site has enough run-back space and overall clearance before ordering.
FFL 95 Gate Width | Recommended Run-Back Space | Overall Space Required |
|---|---|---|
3500mm | 5200mm | 8700mm |
4000mm | 5900mm | 9900mm |
4500mm | 6600mm | 11100mm |
5000mm | 7100mm | 12100mm |
5500mm | 7800mm | 13300mm |
Contact Us
Not sure which gate or configuration is right for your site? Our sales team can help you choose the right solution. Call 01283 512111, email sales@firstfence.co.uk, or speak to us using our online chat.
Specifications & Downloads
| Width | 3.5, 4.0, 4.5, 5.0 or 5.5m [5.5m is not available as 2.2m Height] |
| Height | 1.0, 1.2, 1.5, 1.8, 2.0 or 2.2m |
| Size | Other Sizes Available - Call To Discuss |
| Lead Time | Starts From Drawings Sign Off |
| Material | Galvanised Steel |
| Duty Cycle | 100% Duty Cycle for Intensive Use |
| Finish | Polyester Powder Coated |
| Box Section of Main Gate Frame | 60 x 60mm |
| Infill Type | 25mm Vertical Bar |
| Manufacturer Warranty | 2-Years |
| Standards | Automated Gate Safety to BS EN 12453 |
What's Included
| Name | Quantity |
|---|---|
| Gear Rack [Fitted] | 1 |
| Cantilever Carriages | 1 |
| Bolt Down End Catcher Post | 1 |
| Motor Post & Rear Support Post | 1 |
| Top Support Roller System | 1 |
| Sliding Gate Motor (hidden in the post) | 1 |
| Flashing Light | 1 |
| Dual Height Photocells | 1 |
| Key-Operated Switch With Emergency Stop Button | 1 |
| Category 3 Safety Edges | 6 |
| Remote Control Transmitters/Fobs | 2 |
| Gate Mounted Safety Edge Transmission System | 1 |
| External RF Aerial | 1 |
| Run Back Support Roller | 1 |
View in AR
Scan this code with your phone’s camera to place this product in your own space, or open the 3D viewer directly.
View in ARSpecifications & Downloads
| Width | 3.5, 4.0, 4.5, 5.0 or 5.5m [5.5m is not available as 2.2m Height] |
| Height | 1.0, 1.2, 1.5, 1.8, 2.0 or 2.2m |
| Size | Other Sizes Available - Call To Discuss |
| Lead Time | Starts From Drawings Sign Off |
| Material | Galvanised Steel |
| Duty Cycle | 100% Duty Cycle for Intensive Use |
| Finish | Polyester Powder Coated |
| Box Section of Main Gate Frame | 60 x 60mm |
| Infill Type | 25mm Vertical Bar |
| Manufacturer Warranty | 2-Years |
| Standards | Automated Gate Safety to BS EN 12453 |
What's Included
| Name | Quantity |
|---|---|
| Gear Rack [Fitted] | 1 |
| Cantilever Carriages | 1 |
| Bolt Down End Catcher Post | 1 |
| Motor Post & Rear Support Post | 1 |
| Top Support Roller System | 1 |
| Sliding Gate Motor (hidden in the post) | 1 |
| Flashing Light | 1 |
| Dual Height Photocells | 1 |
| Key-Operated Switch With Emergency Stop Button | 1 |
| Category 3 Safety Edges | 6 |
| Remote Control Transmitters/Fobs | 2 |
| Gate Mounted Safety Edge Transmission System | 1 |
| External RF Aerial | 1 |
| Run Back Support Roller | 1 |
Product Description
FFL 95 Automated Vertical Bar Cantilever Gate 3.5m - 5.5m Wide
The FFL 95 Automated Vertical Bar Cantilever Gate is a heavy-duty access solution designed for secure and reliable vehicle entry. Suitable for commercial and residential properties, its cantilever design allows the gate to slide smoothly without a ground track, making it ideal for sites where space is limited.
The FFL 95 features a built-in 24V gate motor, housed within the support post. This provides a clean, streamlined appearance while protecting the automation system from the elements.
The gate features a vertical 25mm round bar infill, offering a sleek, modern appearance while maintaining a high level of security. The bars are welded directly to the gate frame for added strength and durability.
Available in widths from 3.5m to 5.5m, the FFL 95 is offered in a range of heights and standard RAL colours. Custom colours are also available at an additional cost. Galvanised-only options can be discussed with our sales team.
The FFL 95 is also available as the FFL 130 (5.0m - 7.5m wide) and FFL 200 (7.0m - 12.0m wide), as well as a manual version.
All FFL Series manual and automated cantilever gates come with a 2-year manufacturer's warranty.
Features & Benefits
- Heavy-duty steel construction for strength and durability
- Built-in 24V motor housed within the support post
- 100% duty cycle for reliable frequent use
- Opening speed of up to 9m/min
- 25mm round bar vertical infill for a modern appearance and high security
- Bars are welded to the frame for added strength
- Cantilever design eliminates the need for a ground track
- Protective finish helps prevent rust and withstand harsh weather
- Safety sensors stop the gate if an obstruction is detected
- Advanced locking system for enhanced security
- Available in a range of RAL colours
- Plug-and-play system for straightforward installation
- Compatible with access control and smart technology
Optional Extras
Enhance your gate with a range of optional accessories, including:
- Anti-climb spikes (available on gates over 1.8m high)
- Reflective strips
- Loop detectors
- Intercoms
- Press-to-exit buttons
- Laser scanners
Run-Back Space Requirements
The FFL 95 requires sufficient space behind the gate to allow it to fully open. Make sure your site has enough run-back space and overall clearance before ordering.
FFL 95 Gate Width | Recommended Run-Back Space | Overall Space Required |
|---|---|---|
3500mm | 5200mm | 8700mm |
4000mm | 5900mm | 9900mm |
4500mm | 6600mm | 11100mm |
5000mm | 7100mm | 12100mm |
5500mm | 7800mm | 13300mm |
Contact Us
Not sure which gate or configuration is right for your site? Our sales team can help you choose the right solution. Call 01283 512111, email sales@firstfence.co.uk, or speak to us using our online chat.
View in AR
Scan this code with your phone’s camera to place this product in your own space, or open the 3D viewer directly.
View in AR