Height Above Ground | 1800mm |
Access Width | 3000mm |
Total Width | 3390mm |
Hinge Post Size | 80mm x 80mm |
Hinge Gap | 100mm |
Leaf Gap | 30mm |
Gate Hanging Side | Universally Handed |
Post Type | Square Hollow Section |
Gate Type | Double Leaf Gate |
Material | Pre-Galvanised Steel |
Finish | Powder Coated |
PPC Colours | Green & Black as Standard, Others Available On Request |
Compliant To | Pre-Galvanised Steel to BS EN 10346 / Powder Coated to BS 13438 |
Name | Quantity |
---|---|
Apollo 358 Mesh Gate Leaf | 2 |
Hinge Gate Post | 2 |
Adjustable Gate Eyes | 4 |
Ribbed Inserts for Posts | 2 |
Unislide Slider Padlockable Double Leaf Gate Kit | 1 |
Single Slider Plate Kit | 1 |
Auto Locking Drop Bolt | 2 |
The Apollo 1.8m x 3.0m 358 Prison Mesh Double Leaf Gate Kit provides a strong and secure entry solution for areas that need both reliable access and a professional, unobtrusive appearance. This gate is ideal for environments such as schools, parks, commercial buildings, sports grounds, and recreational areas, anywhere a combination of safety, visibility, and access control is essential.
With an overall height of 1.8 metres and a total width of 3.0 metres (1.5m per gate leaf), this gate offers ample space for pedestrian traffic and smaller vehicles, such as maintenance vans or utility carts. Its double leaf configuration enables flexible entry management, allowing one or both sides to be opened as needed.
This gate uses a high-spec 358 wire mesh system, which is exceptionally resistant to tampering, cutting, and distortion, while still allowing clear visibility for surveillance. This makes the gate suitable for areas where monitoring and a secure-but-welcoming appearance are both priorities.
Each gate leaf is constructed with mitred corners on the steel frame, which not only adds strength but also gives a neat, modern finish. The gate comes equipped with a sliding latch and drop bolts, offering reliable locking whether the gate is fully closed or fixed open. The latch can be padlocked as standard, with optional upgrades available for digital locks and emergency exit devices.
Fabricated from pre-galvanised steel in line with BS EN 10346, and coated with a polyester powder finish conforming to BS 13438, this gate is designed for long-term outdoor use. The powder coating protects against rust, UV exposure, and environmental wear. Standard RAL colour options are available, and bespoke colours can be ordered upon request to suit specific site requirements or branding.
The Apollo 1.8m x 3.0m gate kit is available with either:
Dig-in posts: suited to soft ground installations (requires post mix)
Bolt-down posts: ideal for hard surfaces like concrete (requires ground anchor bolts)
Please note that post mix and anchor bolts are not included and should be purchased separately, depending on your installation type.
If you have questions or need a quote, don't hesitate to get in touch. Our friendly experts are available by phone on 01283 512 111, and by email at sales@firstfence.co.uk. You can also connect via our live chat service.