2.4m x 6.0m Double Leaf Palisade Security Gate Kit
Product Description
2.4m x 6.0m Double Leaf Palisade Security Gate
Please note: Due to material shortages, this gate may be supplied with either 120mm x 120mm or 150mm x 150mm posts.
The 2.4m x 6.0m Double Leaf Palisade Security Gate provides a secure access point for vehicles while maintaining the high-security protection of a palisade perimeter.
With a 6.0m opening, the double leaf design provides access for cars, small vans and forklifts. When closed, the gate integrates with the surrounding palisade fencing and is secured using a sliding latch bolt and two lower drop bolts. For additional security, the sliding latch bolt can be secured with a heavy-duty padlock.
Strong & Secure Construction
Manufactured from cold-rolled steel, the gate combines strength with a lighter construction for easier handling.
The pales feature a W-shaped profile, making them difficult to grip and helping to deter climbing. A choice of pale tops is available, including:
- Round and Notched
- Triple Pointed
- Single Pointed
Pointed pale profiles provide an additional deterrent against climbing and unauthorised access.
Galvanised & PPC Finishes
The gate is galvanised to BS EN ISO 1461:2009, providing a protective zinc coating to help prevent rust and corrosion. A Polyester Powder Coating (PPC) is also available in a range of colours, providing additional protection against weathering and wear while allowing the gate to complement its surroundings.
The gate is supplied with a galvanised finish and triple pointed pales as standard, with alternative pale profiles and PPC finishes available as customisation options.
Choose Your Post Type
The gate can be installed on a range of ground types, provided the correct posts are selected:
- Dig-in posts: Suitable for softer ground where posts can be installed into excavated holes.
- Bolt-down posts: Designed for harder surfaces such as concrete, using a pre-attached base plate and ground anchors.
Select your preferred post configuration when placing your order.
Gate Kit
The 2.4m x 6.0m Double Leaf Palisade Gate is supplied as a complete kit, including the required gate components and fixings.
Please note: Post mix and ground anchor bolts are not included and must be purchased separately where required.
Our Palisade range is supplied unassembled, so the gate will need to be assembled on-site. For installation information, please refer to our Palisade installation guide.
Contact Us
Need help choosing the right palisade gate or post configuration? Our team can provide advice on specifications, installation and available options. Call 01283 512 111, email sales@firstfence.co.uk or speak to us through our online chat.
Specifications & Downloads
| Height | 2400mm [Installed] |
| Total Post Length | [Dig In: 3400mm] [Bolt Down: 2400mm] |
| Total Width | 6440mm |
| Access Width | 6000mm |
| Weight | 298.0kg |
| Post Types | Dig in, Bolt Down |
| Box Sections of Posts | 120mm x 120mm |
| Gate Hanging Side | Left Hand Hung (From Outside Looking In) |
| Material | Galvanised Steel |
| Finish | Galvanised, Powder Coated |
| PPC Colours | Green, Blue, Black, Red, Grey, Yellow |
| Compliant To | BS EN ISO 1461:2009 |
| Pale Types | Triple Pointed, Round & Notched, Single Point |
| Pale Height | 2350mm |
What's Included
| Name | Quantity |
|---|---|
| Sliding Gate Leaf | 1 |
| Catch Gate Leaf | 1 |
| Hinge Gate Posts | 2 |
| Drop Bolts | 2 |
| Adjustable Gate Eyes | 4 |
| Ribbed Inserts for Frame and Posts | 6 |
| 'W' Section Pales | 38 |
| M8 Nuts and Bolts | 76 |
Videos
Specifications & Downloads
| Height | 2400mm [Installed] |
| Total Post Length | [Dig In: 3400mm] [Bolt Down: 2400mm] |
| Total Width | 6440mm |
| Access Width | 6000mm |
| Weight | 298.0kg |
| Post Types | Dig in, Bolt Down |
| Box Sections of Posts | 120mm x 120mm |
| Gate Hanging Side | Left Hand Hung (From Outside Looking In) |
| Material | Galvanised Steel |
| Finish | Galvanised, Powder Coated |
| PPC Colours | Green, Blue, Black, Red, Grey, Yellow |
| Compliant To | BS EN ISO 1461:2009 |
| Pale Types | Triple Pointed, Round & Notched, Single Point |
| Pale Height | 2350mm |
What's Included
| Name | Quantity |
|---|---|
| Sliding Gate Leaf | 1 |
| Catch Gate Leaf | 1 |
| Hinge Gate Posts | 2 |
| Drop Bolts | 2 |
| Adjustable Gate Eyes | 4 |
| Ribbed Inserts for Frame and Posts | 6 |
| 'W' Section Pales | 38 |
| M8 Nuts and Bolts | 76 |
Product Description
2.4m x 6.0m Double Leaf Palisade Security Gate
Please note: Due to material shortages, this gate may be supplied with either 120mm x 120mm or 150mm x 150mm posts.
The 2.4m x 6.0m Double Leaf Palisade Security Gate provides a secure access point for vehicles while maintaining the high-security protection of a palisade perimeter.
With a 6.0m opening, the double leaf design provides access for cars, small vans and forklifts. When closed, the gate integrates with the surrounding palisade fencing and is secured using a sliding latch bolt and two lower drop bolts. For additional security, the sliding latch bolt can be secured with a heavy-duty padlock.
Strong & Secure Construction
Manufactured from cold-rolled steel, the gate combines strength with a lighter construction for easier handling.
The pales feature a W-shaped profile, making them difficult to grip and helping to deter climbing. A choice of pale tops is available, including:
- Round and Notched
- Triple Pointed
- Single Pointed
Pointed pale profiles provide an additional deterrent against climbing and unauthorised access.
Galvanised & PPC Finishes
The gate is galvanised to BS EN ISO 1461:2009, providing a protective zinc coating to help prevent rust and corrosion. A Polyester Powder Coating (PPC) is also available in a range of colours, providing additional protection against weathering and wear while allowing the gate to complement its surroundings.
The gate is supplied with a galvanised finish and triple pointed pales as standard, with alternative pale profiles and PPC finishes available as customisation options.
Choose Your Post Type
The gate can be installed on a range of ground types, provided the correct posts are selected:
- Dig-in posts: Suitable for softer ground where posts can be installed into excavated holes.
- Bolt-down posts: Designed for harder surfaces such as concrete, using a pre-attached base plate and ground anchors.
Select your preferred post configuration when placing your order.
Gate Kit
The 2.4m x 6.0m Double Leaf Palisade Gate is supplied as a complete kit, including the required gate components and fixings.
Please note: Post mix and ground anchor bolts are not included and must be purchased separately where required.
Our Palisade range is supplied unassembled, so the gate will need to be assembled on-site. For installation information, please refer to our Palisade installation guide.
Contact Us
Need help choosing the right palisade gate or post configuration? Our team can provide advice on specifications, installation and available options. Call 01283 512 111, email sales@firstfence.co.uk or speak to us through our online chat.