1.5m high Double Leaf Standard Bow Top Railing Gate
Features and Benefits
- The railings on this gate make it difficult to climb. They also do not contain sharp points due to the bowed railing tops, which make them extremely safe.
- Galvanised steel has been used to construct the gate due to its strength and longevity.
- Powder Coating is also offered as standard which adds further protection against the elements, as well as providing a professional colour.
- If you are installing this gate within hard terrain Bolt-Down Posts are recommended. For softer ground types, Dig-In Posts are recommended.
Standard Bow Top Railing Gates are less imposing than Palisade Gates, which make them a popular choice for community areas. Standing 1.5m high, this Double Leaf Standard Bow Top Gate is available in widths ranging from 2.0m to 10.0m wide. This gate has an attractive look and do not block visibility, especially at a height of 1.5m high.
The gate can be fixed in place with the drop bolts that are installed on each leaf, when the gate is open for an extended period. Standard Bow Top Gates are built to be compatible with non-raking fence systems.
Construction of the Gate
The construction of this gate means that the railings pass through the horizontal bars twice leaving a bow gap on the top of the gate. As well as the drop bolts, a sliding latch bolt is also installed onto the gate to keep it securely closed. For extra security, you can use a Heavy Duty Padlock, available in the customisation section. The hinges will allow the leaves to open up to 180° for maximum access.
This height of Bow Top Gate makes it a popular choice for areas of low to medium security, including schools, churches and residential Nursing Homes.
|Gate Type||Double Leaf Gate|
|Post Type Available||Dig In, Bolt Down|
|Access Width||2.0m, 3.0m, 4.0m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m, 10.0m|
|Finish||Galvanised , Powder Coated|
|PPC Colours||Green, Black|