0.9m High Standard Bow Top Railing Kit

0.9m High Standard Bow Top Railing Kit

Providing a clear yet unintimidating demarcation option, the 1.0m High Standard Bow Top Railing Kits are ideal for use in both public and private locations such as gardens, parks, playgrounds or schools. Each kit is supplied with a panel, post and fixings and is available in either a dig in or bolt down post variant. To increase the functional life span of these railing kits, they have been made from a high quality zinc galvanised steel, allowing them to keep their silver finish for years to come. It is also possible to order these 1.0m High Standard Bow Top Railing Kits with a high quality Polyester Powder Coating in a wide range of RAL colours.

A robust and multi-purpose system, the 0.9m Standard Bow Top Railings are an ideal choice to create low security boundary demarcation in a range of public and private locations such as parks, gardens and schools. They can be used to protect flower beds from being trampled by pedestrians or pets, to create walkways through parks or to create low security perimeters around school play grounds.

Whilst, due to the 0.9m height, they may be seen as a lower security demarcation solution, they are still incredibly strong and hard wearing. Each Bow Top Railing bay has been made from a high quality steel with a zinc galvanised coating as standard. The panel consists of a series of 12mm diameter bent tube sections which are held securely in place with 8mm thick bars running horizontally long the bottom and near to the top. This keeps the overall weight to a minimum whilst remaining incredibly strong. The panels themselves are then held in place with 50mm x 50mm box section posts available in either dig in or bolt down variations.

Using a galvanised steel to create these railing kits allows them to be more resistant to the damaging effects of weathering and rust formation, allowing them to stay strong structurally as well as allowing them to keep their silver finish for longer.

As well as the standard galvanised finish, it is also possible to order these kits with a professionally applied and high quality Polyester Powder Coating (PPC). These coatings are available in a range of RAL colours (please see the website for more information) which not only can allow you to create a fantastic looking railing system, they also provide a secondary level of protection to the steel against corrosion and rust.

Should the PPC coatings become damaged, either during installation or due to accidental damage. It is possible to restore the protective coatings and get your railings looking great again with the use of our easy to use touch up paints.

To make these 0.9m Bow Top Railing Kits as versatile as possible, they are available in both dig in and bolt down post variations.

Bolt down posts – This type of post is the ideal choice when the railings are to be installed in hard ground surfaces where digging holes may not be possible. The posts feature a pre-welded base plate, allowing ground anchor bolts to be drilled into the ground to hold the posts securely in place.

Dig in posts – The dig in post is suited towards locations where it is possible to dig holes due to being a softer ground type. These posts are longer than the bolt down versions, so that a section can be dig into the ground and held in place with the use of post mix.

Benefits and features

• Made from high quality Steel with a zinc galvanised coating.
• Available with either dig in or bolt down posts.
• Available with a high-quality Polyester Powder Coating (PPC) in a variety of RAL colours
• Strong and hard wearing.

Each kit of 0.9m High Standard Bow Top Railings includes:

Each of the 0.9m Bow Top Railing Kits contains the following:

• 1 x Bow Top Fencing Panel
• 1 x Vertical Bar Fencing Post (either dig in or bolt down)
• 4 x Vertical Bar Fencing Angle Cleats
• 4 x M10 x 30mm Bolts
• 2 x M10 x 80mm Bolts
• 6 x M10 Shear Bolts

How to step your panel

Step One: Drill a 6mm pilot hole in the desired location for the new cleat; this is dictated by the gradient.

Step Two: Open the hole to a 12mm hole size to take the M10 bolts (as listed in the step below).

Step Three: Touch up and spray the hole, if required.

Step Four: Attach the cleat using the M10 x 70mm Square Cup Head Bolt and Shear Nut (for 0.9m to 1.2m height system) or M10 x 80mm Square Cup Head Bolt and Shear Nut (1.5m to 2.4m height systems).

Step Five: Attach the railing panel as per standard installation guidance.

Note: Please ensure the spacing relationships are followed according to the existing hole centres on the posts.

Complete you railing perimeter with a gate

Complete your Bow Top Railing perimeter with a Bow Top Gate, available in a range of widths as well as either a single or double leaf design. They will allow you to create a complete perimeter with access for authorised persons and are available in both dig in or bolt down variants.

Contact us:

Should you have any questions about these Bow Top Railing kits or about any of our other fencing systems and accessories, please get in touch with our friendly and helpful sales team. You can contact us via phone on 01283 512 111, through our online chat service or via email at sales@firstfence.co.uk