Material | Galvanised/Zinc Plated Steel |
PPC Colours | Green as standard, other colours available on request |
Post Box Section | 60mm x 60mm |
System Height | 0.6m [Installed] |
Name | Quantity |
---|---|
Folded Corner Clamp Bar [700mm) | 2 |
0.6m High 60° Crank Intermediate Post [60 x 60mm] | 2 |
868 Mesh Fencing Fixing Clips [Black] | 6 |
M8 x 40mm Mesh Security Bolt | 6 |
M8 x 40mm Cup Head Galvanised Bolts | 6 |
M8 Snap Off Nut for Security Bolts | 6 |
Black Ribbed Inserts [60 x 60mm] | 2 |
Strengthen your wall-mounted security against climbing attempts with the First Fence 0.6m High 60 Degree Crank Wall-Mounted 868 Mesh Intermediate Post Kit. Ingeniously designed to integrate seamlessly, this intermediate post not only offers crucial support but also extends an aggressive 60-degree outward crank. This unique angle actively deters unauthorised access and fortifies any wall boundary against intruders.
This comprehensive kit provides all the essential elements for a single corner post section of wall-mounted 60-degree cranked mesh fencing:
Fixing the posts to your wall is critical for optimal security. The type of fixing you use will depend on your wall material (brick, concrete, etc.), the anticipated load, and the environment (indoor vs. outdoor). Each cranked post typically requires a maximum of six M16 fixings for secure attachment, ensuring maximum stability. Common fixings suitable for this application include:
First Fence offers several M16 fixings: M16 x 220mm Ground Anchor Bolt, M16 x 150mm Ground Anchor Bolt, M16 x 125mm Ground Anchor Bolt, and M16 x 190mm Resin Stud Ground Anchors. Please note that the fixings you select will be dependent on the wall material, it is recommended that you carry out an assessment before you begin work.
Mesh panels from the intermediate fencing kit (not included in this kit, but required for installation) will need to be cut on site to suit the desired installation position at the corner.
Before installation, thoroughly inspect the wall's condition; crumbling mortar or hollow bricks necessitate specialised attention.
Mesh panels from the intermediate fencing kit are to be cut on site to suit the desired installation position, typically at a 26.2° angle for the corner.
Measure and mark precisely to ensure a proper fit at the corner junction. Trim the panel using suitable cutting tools (angle grinder). Ensure cuts are clean and straight.
Smooth any rough or sharp edges and apply a protective coating such as cold galvanising spray to prevent corrosion.
Position trimmed panels to form the corner and fasten using appropriate hardware. Ensure precise vertical alignment of all posts by utilising a spirit level.
For outdoor applications, always select corrosion-resistant hardware, such as galvanised or stainless steel, to guarantee lasting durability.
For more information about our wall-mounted fencing solutions or our extensive range of mesh gates and fences, feel free to call us at 01283 512 111. Our team will be happy to assist with any questions you may have.