2.0m High x 2.0m Wide AcoustiGuard® SR1 (A1) LPS 1175 Double Leaf Gate Kit
| Kit Type | Assembled [Fully Assembled for Lifting] |
| Height | 2000mm [Installed] |
| Access Width | 2000mm |
| Box Sections of Posts | 120x120x4mm |
| Gate Hanging Side | Right Hand Hung [From Outside Looking In] |
| Material | Hot Dip Galvanised Steel [Gate Frame] Tanalised UC4 Timber [Acoustic Face] |
| PPC Colours | Galvanised Only |
| Compliant To | ISO 1461 [Galvanising] |
| Certified To | LPS 1175 SR1 (A1) |
| Name | Quantity |
|---|---|
| Sliding Gate Leaf | 1 |
| Catch Gate Leaf | 1 |
| Hinge Post | 2 |
| SR1 Adjustable Gate Eyes | 6 |
| Ribbes Inserts [For Gate Posts] | 2 |
| Ribbed Inserts [For Gate Frame] | 4 |
| Drop Bolt | 2 |
| AcoustiGuard® Absorb Timber Infill | 2 |
2.0m High x 2.0m Wide AcoustiGuard® SR1 (A1) LPS 1175 Double Leaf Gate Kit
Designed for smaller entry points, the AcoustiGuard® SR1 Double Leaf Gate Kit (2.0m x 2.0m) combines dependable security with effective sound reduction. Standing at 2.0m high, it creates a strong deterrent while offering a 2.0m clear opening suited to pedestrian routes, narrow vehicle access, or compact perimeter gaps. Delivered fully built and ready for lifting into place, it ensures a quick, hassle-free installation. Its LPCB-approved security credentials paired with excellent acoustic performance make it a practical solution for schools, utilities, and commercial sites where both safety and environmental comfort matter.
About LPS 1175
This gate is accredited to the LPS 1175 SR1 (A1) standard, meaning it has been independently tested by the Loss Prevention Certification Board to confirm its resistance to forced entry. To achieve this rating, the gate must endure a one-minute attack using a basic toolkit of small, easily concealed tools typically associated with opportunistic crime. This certification demonstrates that the gate provides an essential layer of protection against low-level intruders, delaying access long enough to deter or prevent common security breaches.
Compliance with BS EN 1794-1 and BS EN 1794-2
Beyond security, this system has been designed to perform as a noise barrier and to meet structural safety requirements. BS EN 1794-1 governs acoustic performance, and the pressure-treated UC4 timber frontage reduces sound transfer—either shielding neighbouring areas from site activity or minimising external noise pollution. BS EN 1794-2 ensures structural reliability, covering factors such as wind loading and long-term durability. Supported by a galvanised steel frame and heavy-duty 120x120x4mm posts, the gate is engineered to remain strong, stable, and weather-resistant throughout its service life.
Technical Details
- Kit Type: Delivered as a single, fully assembled unit for fast installation.
- Height: Installed height of 2000mm (2.0m).
- Width: 2000mm (2.0m) clear access, ideal for personnel and smaller vehicles.
- Posts: 120x120x4mm steel box section posts for structural support.
- Leaf Setup: Standard right-hand hung (viewed from outside).
- Materials: Galvanised steel frame (ISO 1461 compliant) combined with UC4 treated timber for acoustic control and durability.
- Finish: Galvanised-only coating for corrosion resistance and reduced maintenance.
- Certification: Tested and approved to LPS 1175 SR1 (A1).
Contact Us
If you have any questions about our AcoustiGuard® range, please get in touch. Our friendly First Feance experts are available by phone on 01283 512 111 or by email on sales@firstfence.co.uk. You can also connect with us via our live chat service.
