Palisade Security Fencing
Buy Palisade Fencing
Introduction To Palisade Fencing
Palisade Fencing is a great solution for locations that need to provide a high level of security. This permanent security fencing system offers great strength and longevity and is perhaps the most traditional form of security fencing. By installing a steel Palisade Security Fencing system around the perimeter of a site, premises can be kept secure at all times as its robust construction and intimidating appearance works as an effective intrusion and theft deterrent. Palisade Fencing also functions as effective boundary demarcation and this can be enhanced through the addition of a polyester powder coated finish.
Designed to provide security and protection in a wide range of outdoor locations, Palisade Security Fencing can be erected on hard ground like concrete by using steel Bolt Down Posts, or on softer ground like grass, where Dig-In Posts are set within the ground. Palisade Fencing is designed for permanent installation and can also be installed on both level ground and sloping ground which has a gradient no greater than 30 degrees; as it can be assembled to run parallel to the ground without the need for stepping.
Palisade Fencing can also be adapted to meet site access requirements and we offer a range of pedestrian and vehicle access gates in heights from 1.8m to 3.0m and in widths ranging from 1.2m to 10.0m. Adding a Palisade Security Gate within your Palisade Fencing system will provide a controllable access point that can be locked to ensure security is maintained at all times.
All Palisade Security Fencing and Palisade Gates are made from cold-rolled steel and are galvanised with a protective zinc coating to help prevent rust over time. This galvanised finish meets the BS EN ISO 1461:2009 standard.
Locations And Functions
As Palisade Fencing offers dependability and a high level of security, you will often see it in a variety of private, public and commercial places. Examples of where Palisade Fencing is used include:
- Industrial sites
- Schools
- Businesses that have large amounts of stock
- Commercial establishments
- Water treatment plants and power stations
- Bus and railway stations
- General fencing for establishing boundaries
Security At Its Best
There are several features of steel Palisade Security Fencing that make it such an effective security fencing system. Palisade Fencing is manufactured using a cold rolling process and whilst this makes the steel lighter in weight than other metals, it does not compromise its strength in any way. Cold rolling involves steel being passed through a number of rollers at room temperature, where the steel is manipulated gradually until its shape is formed, so no heat is required for this manufacturing process. The steel is also galvanised to protect the Palisade Fencing against rust and the addition of polyester powder coating will also increase the resilience of the steel, as well as giving it a brighter look.
Our Palisade Fencing is supplied with ‘w’ section steel pales which means that they have a thinner middle section, with thicker edges that curve inwards. The ‘w’ shape profile of these Palisade pales ultimately provides the Palisade Fencing with greater strength and stability, as well as making them difficult to grip or climb. The Palisade Security Fencing is supplied with triple pointed steel pales as standard, however, we also offer single-pointed pales, plus round and notched pales. These steel Palisade pales are what makes Palisade Fencing such as recognisable security fencing system.
Steel Palisade Fencing also features two steel rails within its construction – a top rail and a bottom rail. The top Palisade Rail also has small barbs along the top, which helps to deter intruders from climbing over the fencing structure.
Palisade Fencing also requires anti-tamper fixings which are designed specifically for Palisade Fencing. Offering a secure connection, the bolt will fit tightly within the bolthole where the top section of the nut will snap off. Therefore, the bolts cannot be tampered with or removed once the Palisade Fencing has been installed.
Our Range
As Palisade Fencing requires a number of different components for its assembly, all Palisade Fencing is supplied as a kit. We offer a handy Palisade Security Fencing calculator which will calculate the quantity of fencing you will need when you enter the perimeter length that your security fencing needs to cover.
We also supply all manual Palisade Gates with the correct number of fixings required for installation.
Palisade Fencing Accessories are also available individually so if you just require replacement fixings, barbed wire or post mix cement, then we can provide this.
Delivery And Installation Services
At First Fence we stock a large amount of Palisade Fencing so we can offer Next Day Delivery to our customers. We also offer Express Delivery and Economy Delivery on Palisade Fencing products. For information about our Delivery Service please browse our Delivery Services page.
We also offer a great Installation Service. One of our professional fitting teams can erect your Palisade Fencing for you; saving you time and ensuring a secure, quality system.
If you would like any more details about the Services that we provide please call us on 01283 512111 and a member of our Sales Team will be happy to help.
