Oxford LowPro 12/8 Trench Cover Infill (Short Side)

Oxford LowPro 12/8 Trench Cover Infill (Short Side)

The LowPro 12/8 Trench Cover is a very versatile product that is easy to transport, store and install. It is Hi-Vis and anti-trip and safely covers holes and trenches up to 700mm, creating a safe passageway for pedestrians, wheelchairs/pushchairs and vehicles (not for use on roadways).

The 12/8 LowPro has Flexi-Edges that create a durable protective barrier for the trench cover, but to prevent drifting, infill connector strips can be used; these remove the recess between covers when two or more are used. The infills create a flat, anti-trip surface to the cover. The short infill is suitable for narrow trenches where the LowPro cover is installed in a landscape format.

Each trench cover infill measures 800mm x 150mm and is made from PVC. The LowPro Infill is supplied with Connector Plate and Bolts (M10 x 20 hex head flanged bolt with a zinc yellow coating).

Installation of the Infills is relatively simple (see Installation Guide in the Downloads section for visual)

• Unscrew the plate and bolts at each end of the Infill
• Insert the plate underneath the LowPro through the bolt hole
• Insert the second plate in the bolt hole on the long or short side
• Place the LowPro with the plates centred over the width of the trench
• Place the next LowPro in line with the first over the Infill plate
• Ensure the LowPro is sitting on the plate at both ends
• Place the Infill between the LowPros and secure with 2 bolts at either end
• Continue placing LowPros over the trench and attaching Infills until the trench is fully covered

First Fence has a full range of road and trench covers for making service work safer, why not take a look?

If you need to contact us to discuss any of these products, please call 01283 512111 or by using the online chat system.