|1800mm (above ground)
|Total Gate Width
|Box Sections of Posts
|200 x 200mm
|Gate Hanging Side
|Right Hand Slider Leaf (From Outside Looking In)
|Thickness of Wires
|Available in Green, Black, Blue, Red, Grey, & Brown - Other custom RAL colours are also available
|Sliding Gate Leaf
|Catch Gate Leaf
|Hinge Gate Post
|Adjustable Gate Eyes
|Ribbed Inserts [For Gate Posts]
|Ribbed Inserts [For Gate Frame]
Appropriate for low level security risk areas, this 1.8m high gate consists of two gate leaves that are both 5 metres in width. Suitable for installation into a new or existing 1.8m high Prison Mesh fencing system, this gate is wide enough to allow two lanes of traffic through, including HGVs. The Prison Mesh is particularly strong due to the dense wire mesh and sophisticated welding. This feature also makes the gate particularly difficult to climb as you cannot get a foothold. Due to the 1.8m height, we would recommend that this gate is used in areas in need of lower security.
There are several mechanisms on the gate for security; they include a sliding latch bolt to hold the gate leaves securely closed. To lock the gates; the latch bolts are compatible with the Padlocks available in the customisation section. The gate has hinges that allow the gate to open up to 180° (90° each way). Drop bolts on each leaf also allow the gate to be held securely open whilst the gate is in use.
Please Note: When attaching your gate to our mesh fencing, additional M8 x 40mm bolts and mesh fencing clips will be required.
Is constructed using horizontal and vertical wires, which both have a diameter of 4mm. At 12.7mm high and 76.2mm wide, the apertures within the mesh structure are narrow enough to prevent climbing activity, but at the same time, still provide a great standard of visibility. Prison Mesh is also known as 358 Mesh, which refers to the measurements in imperial units. It is the ultimate choice for high security locations, due to the fantastic strength and rigidity that it offers. Welded at each intersection, the wires are extremely resistant to cutting and vandalism attempts. As with other mesh fencing security solutions, 358 Prison Mesh is an ideal option for a range of areas including police stations and correctional units, commercial establishments, schools and airports.
All our mesh gates are Hot Dip Galvanized, in line with the requirements of BS EN ISO 1461:2009, to offer protection against rust and corrosion. This unique process offers complete coverage and provides maximum protection through a tough and abrasion resistant coating.
Steel being Hot Dip Galvanized progresses through a temperature cycle upon immersion into and withdrawal from the galvanizing bath. Within this dipping process, uneven heating occurs, creating a temperature profile along the part being galvanized. This temperature profile allows the steels internal stresses to be relieved at different times in the immersion cycle. These stresses may cause changes in shape and/or alignment, evident with distortion and warping. Whist we take all reasonable care during the service, we cannot accept liability relating to distortion, buckling, fracture or change in the properties of the goods. Our standard terms and conditions of sale apply at all times.
If you do have any questions please do not hesitate to speak to one of our sales team by calling 01283 512 111 or by using the online chat facility and they will be happy to help you.