|Total Post Length||[Dig In: 2500mm] [Bolt Down: 1800mm]|
|Post Types||Dig in, Bolt Down|
|Box Sections of Posts||100 x 100mm|
|Gate Hanging Side||Left Hand Hung (From Outside Looking In)|
|Finish||Galvanised, Powder Coated|
|PPC Colours||Green, Blue, Black, Red, Grey, Brown|
|Compliant To||BS EN ISO 1461:2009|
|Pale Types||Triple Pointed, Round & Notched, Single Point|
|Sliding Gate Leaf||1|
|Catch Gate Leaf||1|
|Hinge Gate Posts||2|
|Adjustable Gate Eyes||4|
|Ribbed Inserts for Frame and Posts||6|
|'W' Section Pales||18|
|M8 Nuts and Bolts||36|
This 1.8m x 3.0m Double Leaf Palisade Gate can be used as a point of entry for small sized vehicles like forklifts that require access to a site At 3.0m wide, this Palisade Gate can only allow a single line of traffic to pass through at one time. The installation of this security gate into a Palisade Fencing system enables you to manage the accessibility of your site, as well as keeping your premises secure when no staff is present. The security of this Palisade Gate is attained by securing the sliding latch bolt and two drop bolts, and these are provided with the Palisade Gate. You can also select a Heavy-Duty Padlock as a customisation option to lock your Palisade Fencing.
At 1.8m high, this Palisade Fencing Gate is more appropriate for locations that possess a low security risk. The security gate can be constructed on hard ground using Bolt Down Posts. Alternatively, if this Palisade Gate is erected on soft ground you should use Dig-In Posts and then Postfix cement to set them into the ground.
This Palisade Gate is made from cold rolled steel which makes it thinner, though still high in strength due to the pale edges being thicker and curving inwards. As rust can often form on steel, this 3.0m wide Palisade Gate is provided with a protective zinc coating to help prevent this. This coating is called galvanisation and it effectively meets BS EN ISO 1461:2009 standards. There is also the option to polyester powder coat your Palisade Gate to make it more protected against wear and corrosion. Polyester Powder Coating will also give your Palisade Gate a colourful finish; making it more visible and attractive for the area in which it is erected.
The construction of this Palisade Gate is very effective in providing a high level of security along with our Palisade Fencing systems. The profile of each pale is ‘W’ in shape, and this makes it very hard for anyone to grip them or gain a footing to climb. The pales also have an intimidating design which helps to prevent intruders from gaining unauthorised access. Every 1.8m x 3.0m Double Leaf Palisade Gate that we supply features a galvanised finish and Triple Pointed pale types. You may alter these features by customising your gate above.
We provide all Palisade Gates as a kit which contains all the necessary parts and fixings for construction. Postfix cement will not be supplied within your kit so you will need to purchase this separately if this is required for your Palisade Gate.
There is the opportunity to customise this palisade gate by selecting the post types, pale types, finish or the addition of a Heavy-Duty Padlock, and you may do this when you place your gate order.
If you require more information about any products, please get in touch with the team by calling 01283 512111 or using the online chat facility.