1.5m high Double Leaf Standard Vertical Bar Railing Gate
Features and benefits
- The position of the railings within the gate allows for a sufficient level of visibility, although at the same time are still restrictive to climbing activity.
- The gate is provided with a galvanised finish to help protect it from rusting and this consists of a layer of zinc being applied to the steel.
- You can select from a range of polyester powder coating colours within the customisation section at the top of this page. This finish will supply the gate with a protective barrier to shield it from damage, corrosion and wear.
- A strong and resilient security gate designed for long-term purposes.
Installing this 1.5m high Double Leaf Standard Vertical Bar Railing Gate into your railing structure will enable you to provide vehicle access into a location when required. It is a manually operated gate with two gate leaves, which can be used either together or separately. You can choose your required gate width in the section above to provide a larger accessibility space for your vehicle access needs. It is a very popular choice for areas where the general public will often visit because of its safe construction and colourful, attractive look. The gate is also effective in preventing intrusion and it is very easy to install into non-raking systems.
When the gate is closed you should secure it by shifting the sliding latch bolt across the two gate leaves and by inserting the two drop bolts into the holes within the ground. The two gate leaves have the ability to swing 180 degrees in total. If you wish to lock your gate completely when it is not in use you can order a Heavy Duty Padlock from the customisation section.
There are a number of railings which feature within the construction of this gate and each of these have square cut tops and are completely solid. The gate also contains an upper rail where each railing bar slots through, as well as a bottom rail where the railing bars are welded to it. You should request Bolt Down Posts if you intend to erect this gate on hard ground like concrete and Dig-In Posts if you intend to erect it on soft ground like grass.
Frequently used in areas like residential homes, new housing developments and schools, this type of gate is most suitable for locations which require a lower level of security, as it is 1.5m high.
|Gate Type||Double Leaf Gate|
|Post Type Available||Dig In, Bolt Down|
|Access Width||2.0m, 3.0m, 4.0m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m, 10.0m|
|Finish||Galvanised , Powder Coated|
|PPC Colours||Green, Black|