1.2m High Single Leaf Standard Bow Top Railing Gate Kit
| Gate Type | Single Leaf Gate |
| Height | 1200mm |
| Access Width | 2.0m, 3.0m, 4.0m, 5.0m |
| Total Post Length | 1200mm [Bolt Down], 1650mm [Dig In] |
| Post Type Available | Dig In, Bolt Down |
| Material | Galvanised Steel |
| PPC Colours | Various RAL Colours Available |
| Gate Hanging Side | Right Hand Hung [From Outside Looking In] |
| Name | Quantity |
|---|---|
| Sliding Gate Leaf | 1 |
| Catch Gate Post | 1 |
| Hinge Gate Post | 1 |
| Adjustable Gate Eyes | 2 |
| Drop Bolt | 1 |
1.2m High Single Leaf Standard Bow Top Railing Gate Kit
A Fantastic looking, strong and cost-effective solution for adding a pedestrian or vehicular access point for small to medium vehicles. The single leaf style of this gate and its range of sizes from 2.0m up to 5.0m make these ideal for use for home gardens or to secure driveways. They can also be used in more public spaces such as parks or playgrounds.
Each of these fantastic looking 1.2m high metal bow top gates has been made to our highest standards by our expert team of fabricators using high quality galvanised steel. The zinc galvanised coating provides the steel with a layer of protection against the damaging effects of weathering and corrosion. This combined with the robust construction of the gates mean they will remain strong, stable and looking great for years to come.
Each of these 1.2m steel bow top railing gates are supplied with a sliding latch bolt. This allows the gate to be securely closed when not in use. The sliding latches can be locked in place with the use of a heavy-duty padlock (sold separately), which can prevent prevent unauthorized access.
The gates are also supplied with a drop bolt. The drop bolt is ideal for holding the gate open for extended periods of time, they can also be used to further secure the gate when not in use.
To enable the 1.2m high single leaf metal bow top gates to be installed in as many different locations as possible, they are available with either dig in or bolt down posts.
Dig in posts – The dig in posts are designed to be used in areas where holes can be dug easily. These posts are longer than their bolt down variants, allowing a section of the post to be placed into the hole and secured in place with the use of post mix (sold separately)
Bolt down posts – The bolt down posts are suitable for areas where the ground surface may have been covered with concrete, making digging holes impractical or not possible. These bolts have base plates pre-attached which allow for ground anchor bolts (sold separately) to be used to secure each post to the ground surface.
Each gate kit includes:
- 1 x Sliding catch gate leaf
- 1 x Catch gate post
- 1 x Hinge gate post
- 2 x Adjustable gate eye
- 1 x Drop bolt
Customise your gate with a PPC finish
As standard, the 1.2m high bow top gates are finished with a zinc galvanised coating, these coatings provide the steel with a layer of protection against the damaging effects of corrosion and rust.
It is also possible to add a splash of colour to the gates with the application of a professionally applied Polyester Powder Coating (PPC). These high-quality finishes can add some much-needed colour to your railing system, allowing the gates to either blend into their environment or create an eye-catching entry or exit point. These coatings also provide the steel with a secondary layer of protection against the damaging effects of weathering and rust.
Benefits and features
- Available in a range of widths – Starting from 2.0m up to 5.0m, these single leaf gates provide a safe point of access for either pedestrians or a single line of vehicles.
- Stylish bow top design – The gates modern bow top design looks fantastic and also eliminates any potential sharp points from the top of each gate
- Made to last – Each gate has been made using superb quality galvanised steel and assembled to our highest standards by our expert fabrication team. Their superior strength and galvanised zinc finish mean that they will remain strong, stable and looking great for years to come.
- Customise your gate with a PPC finish – Each of these 1.2m bow top gates can be customised with a professionally applied Polyester Powder Coating (PPC). These coatings don’t only look great, but also provide the steel with an extra layer of protection.
Add some additional safety to your gate with a gate restrainer
Gate restrainers are an incredibly important in preventing accidents and injuries occurring in the unlikely event of the hinges failing. These incredibly strong steel wires are quick and easy to install and can hold the gate leafs preventing them from falling to the ground.
Contact us
Our friendly and helpful sales team are here to assist with any questions or queries you may have in regards to these railing gates, or any of the other fencing and railing items. We can be reached by phone in 01283 512 111, by email at sales@firstfence.co.uk or through our online live chat service.
