|Gate Type||Single Leaf Gate|
|Access Widths||2.0m, 3.0m, 4.0m, 5.0m|
|Total Post Length||1000mm [Bolt Down], 1500mm [Dig In]|
|Box Section for Post||60mm x 60mm|
|Post Type Available||Dig In, Bolt Down|
|PPC Colours||Various RAL Colours Available|
|Sliding Gate Leaf||1|
|Catch Gate Post||1|
|Hinge Gate Post||1|
|Adjustable Gate Eyes||2|
Featuring a classic vertical bar design, these excellent quality and cost-effective railing gates stand at 1.0m high and are available in widths from 2.0m to 5.0m, allowing access for pedestrians and vehicles.
With its classic vertical bar design, these gates look fantastic in a range of outdoor environments such as home front or back gardens, schools, parks and other public spaces.
Each of these gates has been made to our highest possible standards by our expert fabrication team. The gates themselves are constructed from high quality galvanised steel, with their zinc coatings providing a layer of protection against the damaging effects of corrosion and rust formation.
Each of these 1.0m high vertical bar gates are supplied with a sliding latch bolt. These bolts hold the gate leafs securely closed when not in use. They can also be used in conjunction with a heavy-duty padlock (sold separately) to prevent unauthorized access and to also prevent access during particular times of the day.
These 1.0m high vertical bar metal railing gates are available with either dig in or bolt down posts, allowing installation of these gates in a wide variety of locations to suit your needs.
Dig in posts – The dig in posts have been designed for use in locations where it is possible to dig holes such as in soil, or other soft ground types. These posts are longer than the bolt down version, which allows a section to be placed into the hole and secured in place with post mix (sold separately)
Bolt down posts - The bolt down posts are an ideal choice for locations where the ground surface may have been covered in concrete, which makes digging holes time consuming or cost ineffective. This type of post has a base plate attached which allows for ground anchor bolts (sold separately) to be used to hold the posts in position.
As standard, each of these 1.0m high metal railing gates are finished with a galvanised zinc coating. This provides the steel with a layer of protection against corrosion, whilst also providing the gate with a fantastic silver finish. It is also possible to have these gates with a Polyester Powder Coated (PPC) finish. These high quality and professionally applied coatings are available in a wide range of RAL colours, allowing you to have a gate which blends in with its surroundings or create a bright and eye-catching entry or exit point. This also provides the steel with an additional layer of protection against corrosion and rust. (Please note: lead times may apply, please see lead times when selecting colours)
A gate restrainer offers additional safety to your gate system by incorporating an incredibly strong wire cable which, when installed, prevents the gate leaf from falling. This can greatly reduce the risks of accidents and injuries occurring in the unlikely and unfortunate event of the gate hinges failing.
Should you have any questions or queries about these gates, or any of our other railing and fencing systems, then please get in touch. Our helpful and friendly sales team are here to help and can be reached by phone on 01283 512 111, by email at firstname.lastname@example.org or through our online live chat system.