Height | 1800mm [Installed] |
Total Post Length | [Dig In: 2500mm] [Bolt Down: 1800mm] |
Width | 3330mm |
Access Width | 3000mm |
Weight | 141kg |
Post Types | Dig in, Bolt Down |
Box Sections of Posts | 120x120mm (Hinge) 100x100 (Catch) |
Gate Hanging Side | Left Hand Hung (From Outside Looking In) |
Material | Galvanised Steel |
Finish | Galvanised, Powder Coated |
PPC Colours | Green, Blue, Black, Red, Grey, Brown |
Compliant To | BS EN ISO 1461:2009 |
Pale Types | Triple Pointed, Round & Notched, Single Point |
Pale Height | 1750mm |
Name | Quantity |
---|---|
Sliding Gate Leaf | 1 |
Catch Gate Post | 1 |
Hinge Gate Post | 1 |
Drop Bolts | 1 |
Adjustable Gate Eyes | 2 |
Ribbed Inserts for Frame and Posts | 4 |
'W' Section Pales | 19 |
M8 Nuts and Bolts | 38 |
This 1.8m x 3.0m Single Leaf Palisade Gate is suitable for creating an access point within a Palisade Fencing system to allow small vehicles such as forklifts and cars to enter a site. By installing this Palisade Gate, you can control the accessibility of your site, along with effectively securing your premises when it is closed. You should use the sliding bolt and drop bolt (provided with your gate kit) to secure the Palisade Gate when it is shut, although you may wish to add further protection to your security fencing and Palisade Gate by using a Heavy Duty Padlock to lock it. This security gate is unsuitable for large vehicles.
With a height of 1.8m, you may use this gate in areas which do not have a high risk to their security. It is very strong and will remain stable, even in high winds. This Palisade Gate can be erected on hard ground with Bolt Down Posts and on soft ground with Dig-In Posts. When the gate is not in use it will effectively merge with your Palisade Fencing structure.
Made from cold rolled steel, this 1.8m x 3.0m Single Leaf Palisade Gate offers a great amount of durability. The Palisade Gate is given a galvanised finish, which means that a protective zinc coating has been applied to help with the prevention of rust. This galvanised finish complies with the BS EN ISO 1461:2009 standard. You may also provide your Palisade Gate with extra protection through the application of a Polyester Powder Coating. This finish will supply your Palisade Fencing Gate with a more aesthetically pleasing appearance and make it more damage resistant. This can be requested as a customisation option where you can choose from a range of RAL colours.
This Palisade Gate is also very difficult to climb onto due to the design and construction of the pales. With a ‘W’ shaped profile, these palisade pales effectively help to prevent intrusion. All 1.8m x 3.0m Single Leaf Palisade Gates are supplied with Triple Pointed Pales and a galvanised finish as standard, however you may alter these gate features and customise your Palisade Gate when you place your order.
Your 3.0m wide Palisade Gate will be delivered to you as an assembly kit and will include all of the required posts, hinges, pales, gate frame, to fit into your Palisade Fencing System, plus a sliding latch bolt, drop bolt and bolt fixtures. Postfix cement and Ground Anchors are not included in our Palisade kits however, so you will need to add these to your shopping cart if required.
We offer a selection of customisation options, which can be found at the top of this page. Here, you can choose the right type of posts, pales and finish for your Palisade Gate or request a Heavy-Duty Padlock.
Need some advice or more technical information about our 1.8m x 1.2m pedestrian palisade gate, then please don’t hesitate to get in touch. We can be reached online via phone on 01283 512 111, online through our online chat service or by email at sales@firstfence.co.uk