|Single Board Dimensions
|1780mm wide x 150mm high
|1800mm (Assembled Kit)
|1780mm (Assembled Kit)
|Wood Plastic Composite (Boards), Aluminum (Posts and Profiles)
|Brown or Dark Grey
|1.9m, 2.4m or 3.0m
|Box Sections of Posts
|70mm x 70mm
|On Baseplate [1.9m] or dig in 2.4m or 3.0m]
|Top And Bottom Profile Dimensions
|Boards Per Kit
This Composite Fencing Board Set is made from low-maintenance wood plastic composite panels that fit together to create a stylish, modern and very environmentally friendly privacy fence for your garden.
The Wood Plastic Composite is made from 98% recycled content and is 100% recyclable, making this a very environmentally friendly product. The natural fibres used to make the boards are surplus or recycled material from the wood and food industries. The HDPE (high-density polyethylene) components are from existing recycled HDPE products. The boards are recyclable through standard household recycling.
It is weather resistant and will not warp or move in the way that a wood panel does in response to wet or dry conditions and is impervious to attacks from wood-eating organisms and rot.
It is relatively simple to install with basic tools and very easy to maintain; to clean you can wipe down with a damp cloth or use a pressure washer.
Dark Grey (Anthracite) or Brown wood effect options are available as well as two decorative board formats that are stylishly designed to provide some visibility/partial privacy while adding a modern twist and a hint of your personal style to your fence. You can also combine any panels to create your own design.
Each Panel contains 12 boards, top profile and bottom profile as standard. You can add posts, decorative panels and wind anchors to your kit.
One set comprises 12 fencing boards and will create an 1800mm high panel. There is a choice of posts, the 1.9m post is for installation on a baseplate and bolted down or to dig in for a lower height fence. The 2.4m post is for concreting into the ground and the 3.0m is for sloping ground, all will give you a 1.8m high fence.
The U-Profile post is available for attaching to flat surfaces such as a wall, so you don't need to dig in near your house's foundations. It can also be attached to a fence post to create a corner. It is attached to the surface of the wall or post with the appropriate fixings, which will vary depending on the substance.
An advantage of our composite fencing is that they can be used with existing concrete posts. A u profile is attached to the recess in the concrete posts and the composite boards easily slots in. This is perfect solution if you want to update your old wooden panels but keep the concrete posts.
Our decorative panels are great for adding a little personality and some partial privacy. We have two board options, a classic look with rows of square holes that give an element of seclusion, and a modern design with cut out vertical and slanted strips. Please refer to Installation Guide for guidance. Each decorative infill is made from high-grade stainless steel and measures 1780mm x 150mm including aluminium adapter profile (20x20x1800). The adapter profile is required to mount the decorative board on the wood composite panels' tongue and groove system. The adapter profiles can also be used to create a design detail. Each Panel contains 12 boards, top profile and bottom profile. If you order a decorative panel, you will still receive 12 standard panels plus the decorative panel which means you will have a spare which is great if you have to replace one in the future or would like yo change the design of your fencing. Please Note: Decorative panels can only be installed in the upper third section. When multiple decorative profiles are used in one panel, there must always be a standard Horizon panel in between. Please refer to Installation Guide for guidance.
The HoriZen Wind Anchors are designed to support the HoriZen Prime system of composite fencing and are for use in areas where the wind speed is higher than 90km/h. They reduce the chance of wind damage to your fencing run in areas that are very exposed and subject to high wind.
They are manufactured from high-quality aluminium and have a polyester powder coating in RAL 7016 S to match the components in the HoriZen fencing range and will help give your fencing structure a lovely, uniform look. All components required to attach to the fence are supplied with the Wind Anchor (M8 x 80mm) and installation instructions. Chemical/Resin bolts needed to connect the anchor to the ground are not included (M12 x 120mm), but are highly recommended for a very secure installation.
If you have any questions about First Fence products please get in touch and a member of the sales team will be happy to help you. We can be contacted by calling 01283 512111 or by using the on-screen chat system.