1.2m High x 5.0m Wide Twin Mesh Single Leaf Gate Kit
| Height | 1200mm [above ground] |
| Access Width | 5000mm |
| Box Sections of Posts | [Hinge Post: 150mm x 150mm] [Catch Post: 100mm x 100mm] |
| Gate Hanging Side | Right Hand Hung [From Outside Looking In] |
| Thickness of Wires | [Horizontal: 8mm] [Vertical: 6mm] |
| Material | Pre-Galvanised Steel |
| PPC Colours | Available in Green, Black, Blue, Red, Grey, & Brown - Other custom RAL colours are also available |
| Name | Quantity |
|---|---|
| Sliding Gate Leaf | 1 |
| Catch Gate Post | 1 |
| Hinge Gate Post | 1 |
| Drop Bolts | 1 |
| Adjustable Gate Eyes | 2 |
| Ribbed Inserts [For Gate Posts] | 2 |
| Ribbed Inserts [For Gate Frame] | 2 |
1.2m High x 5.0m Wide Twin Mesh Single Leaf Gate Kit
Features and Benefits
868 Twin Mesh is a well known welded mesh structure that has a very recognisable appearance. The construction consists of 8mm horizontal wires that are crossed by 6mm wires forming a close mesh that has good visibility through, yet is difficult for anyone to climb up. It is impossible to pass large objects through the mesh so it acts as a good theft deterrent. This double wire construction makes it incredibly difficult to cut through using standard tools and should protect a site well
A popular choice for low to medium security situations and is often seen around the perimeter of schools, sports grounds and some industrial sites. When you add this gate to your fencing system it will create a safe and secure point of entry that can be padlocked with one of our heavy duty locks.
1.2m x 5.0m gates are the ideal solution for areas that require a point of access for forklifts, cars and even small vans and should be installed into a fencing system of the same height to give a consistency and appealing look to a boundary. The gate is suitable for most ground types, we would recommend using Bolt-Down Posts for harder ground types such as concrete, where digging a hole for a post may not be possible. Dig-In Posts are more suited for use on softer ground where it is possible to dig holes which can then be filled with post mix
This twin mesh gate comes pre-galvanised, however we offer a polyester powder coating service to our customers. This will add another layer of defence against weather and other damage and will help enhance the lifespan of the product. Also, you could consider matching any corporate branding colours to give a very professional and sleek appearance.
Included In This Kit
Our 1.2m x 5.0m mesh gate comes complete with everything you need to install the gate, all of the components are listed below:
- 1 x gate leaf - Height: 1150mm Width: 4985mm
- 1 x gate catch post - 100mm x 100mm Box Section Dig in Post Length : 1800mm Bolt down Post Length: 1200mm
- 1 x gate hinge post - 150mm x 150mm Box Section Dig in Post Length : 1800mm Bolt down Post Length: 1200mm
- 1 x drop bolt
- 2 x adjustable gate eyes
- 4 x ribbed post cap inserts ( 2 x 60mm x 60mm, 1 x 100mm x 100mm, 1 x 150mm x 150mm)
Please Note: When attaching your gate to our mesh fencing, additional M8 x 40mm bolts and mesh fencing clips will be required.
Get In Touch
If you have any questions about First Fence products then please get in touch with our sales team who will be happy to help you. We can be contacted by calling 01283 512111 , by email at sales@firstfence.co.uk or by using the online chat facility.
