FF6000B - 4.0m Pole Automatic Barrier

£1,341.00 £1,609.20 Inc Vat

Easy to install and low maintenance, this Automatic Barrier can be programmed to suit your access requirements.

Images shown are for illustration purposes only and actual products may differ slightly


Location & Function

Site security is a key factor within any industrial or commercial premises and whether you need to provide access to a business premises or separate car parking facilities, our range of Automatic Barriers can give you peace of mind.

Easy to install and low maintenance, this Automatic Barrier can be programmed to suit your access requirements.


Motor and Operation

  • This Inverter Driven barrier has a 100% Continuous Duty Cycle through its Single Phase Supply, 3 Phase Motor and Two Stage Gear Box.
  • The programmable Control Panel comes with Fault Diagnostic on-screen display, with the Adjustable Speed, Acceleration and Deceleration for arm operation.
  • A Manual Override is also included in case of power failure, as well as a 8.2KΩ Safety Contact Edge.
  • Ready for Loop Detectors to be installed, this barrier comes Pre-Wired for Single Channel Access Control.
  • Due to the operation of this barrier, no springs or counterweights are needed, as it has Heavy Duty Roller Plunger Limit Switches.


Construction and Materials

  • Aluminium Extruded Cabinet
  • Removable Cast Aluminium Hood
  • Heavy Duty Pillar Box Bearing
  • Comes with M12 Anchor Shield Bolts for installation.


Access Control & Other Accessories

From the Access Control Guide below, this Barrier is compatible with the following accessories:

  • GSM Intercom 
  • Proximity Access Keypads  
  • Reader Pedestals
  • Loop Detectors & Loop Wires 

More Information
Pole length 4.0m Plain Pole Only
Opening/ Closing Time 1.5-4.0 Seconds (Adjustable)
Power Supply Single Phase 230v 50Hz 4.0 Amps
Drive Unit 3 Phase Motor & Wormed Gearbox
Finish Aluminium & Polyester Powder Coated
Accessories Pre-Wired Loop Detector Bases
Springs/ Counter Weights NOT REQUIRED
Cycles 100% Continuous Duty Cycle Rating
Control Panel Programmable PCB & Inverter Driven
Boom Diameter 86mm x 60mm Oval
Safety Edge Controller Direct Connection of Separate 8.2KΩ Safety Contact Edge
Dimensions 291mm x 354mm x 930mm
Ambient Humidity -10 ~ 55 Degrees Centigrade
Fixings M12 Anchor Shield Bolts Included
Control Panel IP Rating IP57
Settings Programmable Configuration as Standard

No Related Posts

Copyright © 2013-2017 Magento, Inc. All rights reserved.