358 Prison Mesh Single Leaf Gate - 2.4m high x 4.0m wide
This 2.4m x 4.0m Single Leaf Prison Mesh Gate provides a good standard of visibility for pedestrians, personnel and security cameras.
*Please note all images are for illustration purposes only and actual products may vary.
Features and Benefits
- Mesh construction – with narrow apertures and robust wires, the mesh has the ability to resist wire cutting when standard tools are employed, as well as withstand vandalism and damage attempts. The apertures are too small for objects to be passed through, but the positioning of the wires does not reduce visibility.
- Pre-Galvanised finish – the gate is coated with zinc to help prevent rust, as this can cause permanent damage.
- Polyester Powder Coating – supplying the gate with this extra protective layer will help to prevent vandalism and weathering causing damage. This type of finish is available in a variety of colours, so you can tailor your gate’s appearance to suit company colours or to compliment the environment in which it will stand.
- Ground suitability – the ground type on which you erect your gate will determine which gate posts you will be able to use. You should construct this gate on hard ground by using Bolt Down Posts, otherwise you should use Dig-In Posts to construct the gate on softer ground.
This 2.4m x 4.0m Single Leaf Prison Mesh Gate is an ideal solution for site’s requiring a secure point of access for vehicles. At 4.0m wide, the gate is able to allow vehicles like small vans, cars and forklifts to drive through. When the gate is closed and not in use it will work with the surrounding fencing to help guard the location and keep it protected from intrusion. The key feature of this gate is the type of mesh that is used in its construction. Containing significantly smaller gaps than Twin Mesh, 358 Prison Mesh offers an even greater level of security and protection as climbing opportunities are more restricted. However, this type of mesh still provides effective visibility, where both people and security cameras are able to have a clear and unobstructed view. You will frequently see this type of gate used in places like police stations and commercial establishments, due to its high security mesh and 2.4m height.
When the gate is shut it should be secured in order to prevent any unauthorised access. To do this you should use the drop bolt and sliding latch bolt, which both come as part of your gate kit. There is also the opportunity to purchase a Heavy Duty Padlock from the customisation section and this will supply your gate with additional security.
358 Prison Mesh
is constructed using horizontal and vertical wires, which both have a diameter of 4mm. At 12.7mm high and 76.2mm wide, the apertures within the mesh structure are narrow enough to prevent climbing activity, but at the same time, still provide a great standard of visibility. Prison Mesh is also known as 358 Mesh, which refers to the measurements in imperial units. It is the ultimate choice for high security locations, due to the fantastic strength and rigidity that it offers. Welded at each intersection, the wires are extremely resistant to cutting and vandalism attempts. As with other mesh fencing security solutions, 358 Prison Mesh is an ideal option for a range of areas including police stations and correctional units, commercial establishments, schools and airports.
|Gate Type||Single Leaf Gate|
|Gate Hanging Side||Right Hand Hung (From Outside Looking In)|
|Total Gate Width||4350mm|
|Finish||Polyester Powder Coating|