2.0m x 7.0m Double Leaf Palisade Security Gate
Make your 2.0m x 7.0m Double Leaf Palisade Gate extra secure with a Heavy Duty Padlock.
*Please note all images are for illustration purposes only and actual products may vary.
You can use this 2.0m x 7.0m Double Leaf Palisade Gate as an entry point for vans and lorries requiring access to a site. This Palisade Gate is easy to install and can be incorporated into Palisade Fencing systems that are also 2.0m in height. The Palisade Gate is made up of two gate leaves which open to form a 7.0m wide driving space. At 7.0m wide, this Palisade Fencing Gate is suitable for two lanes of traffic to pass through. The Palisade Gate features a sliding latch bolt and two drop bolts, which effectively release the security gate so that it can open and secure the gate when it is closed. To lock the Palisade Gate altogether you can use a Heavy Duty Padlock, which is available as a customisation option. Using this type of gate will enable you to manage the accessibility of your site and keep it secured when no staff are present.
Due to its 2.0m height, this Palisade Gate is most appropriate for locations that do not need a high level of security. This Double Leaf Palisade Gate, along with you Palisade Security Fencing System, can be erected on a level or sloped ground surface and on both hard and soft types of ground. The type of ground that you choose to construct your Palisade Gate upon will influence which type of posts you will need to use. Bolt Down posts are suitable for hard ground such as concrete and Dig-In posts are suitable for softer types of ground like grass.
Features and Manufacture
This 7.0m wide Palisade Gate is manufactured from cold rolled steel and is very strong and long lasting. It is also galvanised to the BS EN ISO 1461:2009 standard. By galvanising the steel the Palisade Gate is provided with a zinc coating which makes it more resistant to rusting. There is also the opportunity to supply extra protection to your Palisade Gate by polyester powder coating it. By opting for this type of finish, your gate will be better protected from general wear and corrosion, as well as being given a brighter and more aesthetically pleasing look. Polyester Powder Coating can be requested in different RAL colours and these can be found within the customisation section.
This Palisade Gate also supplies a great standard of security to your location so that intruders cannot gain access to your premises. This is achieved through the effective design of the palisade gate pales. The pales also feature a ‘W’ shaped profile in order to make it difficult for anyone to grip onto them to eventually climb over.
All Palisade Gates will be supplied with a standard galvanised finish and triple pointed pales, however you can modify these gate features by selecting alternative customisation options.
Each 2.0m x 7.0m Double Leaf Palisade Gate will be sold as an assembly kit. Within this kit you will receive posts, pales, drop bolts, fixing bolts, hinges, a sliding latch bolt and the entire gate frame. However, you will not receive any Postfix cement within your Palisade Gate kit, so if you require any of this for Dig-In posts, you should order this as an additional item.
You can also customise your Palisade Gate through a number of options. This will allow you to choose which pales, posts and finish your gate will have and whether to increase your gate’s security with a Heavy Duty Padlock.
|Gate Type||Double Leaf Gate|
|Post Type Available||Dig In, Bolt Down|
|Pale Type Available||Triple Pointed, Round & Notched, Single Point|
|Finish||Galvanised , Powder Coated|
|PPC Colours||Green, Blue, Black, Red, Grey, Yellow|
Configure 2.0m x 7.0m Double Leaf Palisade Security Gate
Post & Pale Type