1.8m x 2.0m Single Leaf Palisade Security Gate
A 1.8m x 2.0m Single Leaf Palisade Gate that is secured with a sliding bolt.
*Please note all images are for illustration purposes only and actual products may vary.
This 1.8m x 2.0m Single Leaf Palisade Gate should be installed within Palisade Fencing which needs to provide access to small vehicles. With a width of 2.0m, this Palisade Gate is wide enough for cars and forklifts, but it is not wide enough for larger vehicles like lorries. When you install this Palisade Gate you will provide an effective access point, which easily swings open 180° and is secured with a sliding latch bolt and drop bolt when closed. For additional Palisade Fencing and gate security, you may request a Heavy Duty Padlock for your Single Leaf Gate. Due to its 1.8m height, this type of Palisade Gate is appropriate for parks or locations that possess a lower security risk.
A very strong and dependable gate, this Palisade Fencing Gate not only functions as a vehicle entry point, but it also works with your Palisade Fencing to ensure that your site is protected from any potential damage or intrusion. This steel Palisade Gate is also a very versatile gate as it may be assembled in a variety of locations and on various ground surfaces. For harder types of ground surfaces you will need to use Bolt Down Posts to erect your Palisade Fencing and Palisade Gate. Alternatively, if you are assembling this Palisade Gate on softer types of ground, you will need to use Dig-In Posts, along with Postfix cement.
Features and Manufacture
A 1.8m x 2.0m Single Leaf Palisade Gate is extremely robust and weather resistant. It is made from cold rolled steel and is always supplied with a protective galvanised finish, which conforms to BS EN ISO 1461:2009 standards. The galvanising process used for the Palisade Gate’s manufacture helps to prevent rust forming on the steel; ultimately making the security gate longer-lasting. This Palisade Gate may also be given a Polyester Powder Coating which provides it with a colourful appearance and extra protection from wear and corrosion. You can also find all of these options when ordering your Palisade Fencing system above.
This Palisade Gate is also very tough to scale. The pales encompass a profile which is ‘W’ shaped, which make the Palisade Gate difficult to grip, so climbing attempts are limited. Each of the pales will have a Single Pointed, Triple Pointed or Round and Notched style design and these also help to prevent climbing, as well as being an effective theft deterrent. When purchasing this type of Palisade Gate you will automatically be supplied with a security gate that has a galvanised finish and Triple Pointed pale tops; however you may change these features in the customisation section.
We always supply our 1.8m x 2.0m Single Leaf Palisade Gates as a kit. These kits will contain all of the required Palisade Gate components: pales, posts, hinges, drop bolt, sliding latch bolt, gate frame, to fit into your Palisade Fencing, plus fixing bolts. We do not include Postfix cement or Ground Anchor Bolts within our kits however, so you will be required to buy these separately if required.
|Gate Type||Single Leaf Gate|
|Gate Width (mm)||2000mm|
Configure 1.8m x 2.0m Single Leaf Palisade Security Gate
Post & Pale Type
- 1.8m x 3.0m Single Leaf Palisade Security Gate£414.00 All prices are exclusive of vat
- 1.8m x 3.0m Double Leaf Palisade Security Gate£414.00 All prices are exclusive of vat
- FF9000 Manual Sliding Gate£3,762.00 All prices are exclusive of vat
- FF9000 Automatic Sliding Gate£7,380.00 All prices are exclusive of vat