1.8m x 1.2m Pedestrian Palisade Security Gate
A 1.8m x 1.2m Pedestrian Palisade Gate available for Polyester Powder Coating.
*Please note all images are for illustration purposes only and actual products may vary.
A 1.8m x 1.2m Pedestrian Palisade Gate should be used as an access point for pedestrians who need to enter your site. Possessing a width of 1.2m, this Palisade Gate must only be used for pedestrian traffic as it is not wide enough for any type of vehicle to pass through safely. When this gate is not in use it is secured with a sliding latch bolt, where it effectively merges into the Palisade Security Fencing to form a continuous structure.
Due to its height of 1.8 metres, this type of Palisade Gate is most suitable for locations that do not have a high security risk. You may install this gate into Palisade Fencing systems which have been constructed on either soft grounds such as grass; or hard grounds like concrete - you will just need to ensure that you select the right type of Posts for your Palisade Fencing system. You may also fix a 1.8m x 1.2m Palisade Gate into a security fencing structure that has been built on either level or sloping ground, as the gate’s pales and rails can be assembled to run in line with the ground below. However, this will require a custom hinge, and should be discussed with our fabrication department.
Features and Manufacture
With their ‘W’ shape profile, the palisade pales are designed to be tough to grip, making it extremely difficult for potential intruders to climb onto your palisade gate. The tops of the pales are also designed to make opportunities for climbing very difficult as well as being a useful theft deterrent. There is a selection of pale styles that you can choose from, where each style has a different safety level as well as intimidation factor. You can find all of these options above when ordering your Palisade Fencing.
Strength and durability are also great features of this Palisade Gate. Manufactured from cold rolled steel, this Palisade Fencing Gate is provided with a galvanised finish which complies with the BS EN ISO 1461:2009 standard, and this ultimately helps to protect it from rusting. There is also the option to have a Polyester Powder Coating finish applied to your Palisade Gate. Along with making your Palisade Gate more colourful, this finish will effectively provide the security gate with more protection against damage and weathering. All of these options are also available when choosing your Palisade Fencing System.
When you purchase a 1.8m x 1.2m Pedestrian Palisade Gate you will be supplied with a kit containing the required components for gate assembly. This will include the gate frame, to fit into your Palisade Fencing, pales, posts, hinges, sliding latch bolt, drop bolts and bolt fixings. This is really handy as you do not need to order each item separately or calculate item quantities. You will however, need to place a separate order for Postfix cement and Ground Anchor Bolts if you require these for installation, as you will not receive any of these items with your Palisade Gate kit.
We understand that each of our customers will have different requirements for their Palisade Gate, which is why we offer a number of customisation options. This means that you can choose how your Palisade Gate will look, as well as increase the security of your Palisade Gate.
|Gate Type||Pedestrian Gate|
|Post Type Available||Dig In, Bolt Down|
|Pale Type Available||Triple Pointed, Round & Notched, Single Point|
|Finish||Galvanised , Powder Coated|
|PPC Colours||Green, Blue, Black, Red, Grey, Yellow|
Configure 1.8m x 1.2m Pedestrian Palisade Security Gate
Post & Pale Type